welds

I thought it might be homemade until I saw it in person, and the welds seem "professional". It looks like a little bit of alot of bikes but I can't figure it out. Any Ideas???

Anyone have any clue or examples of chain tensioners without welds holding them on??

Fox scamp,roller. Shown with engine but not sold with it. Does include the clutch cover and bracket. Tires look good. Double Indian head tires single side. Has brake caliper but missing pins and back side. Frame looks straight with no re welds. Forks look like they might have been straightened...

Here is a LiL indian Spitfire that I picked up several months ago. It wasn't in the greatest shape though. The motor that was on it was trash, the footpegs were sagging down badly and the welds were cracked on them. Someone welded the handlebars so they wouldn't fold down anymore and didn't even...

Need some ideas for straightening some forks bent between the triple trees. They are welded to the fork mounting bolt and nut with part of the upper tree missing! I don't want to try grinding down the welds and losing more material?

My mini bike was in a shop for a couple of days getting some small cracks welded on the motor plate and rear fender. They also bent my exhaust, so the exhaust wouldn't interfere with the frame. It performs and sounds great!

Just got done wire wheelin the frame for my Mini. Found some welds on the forks that needed attention,It didn't look like anything had happened to create this problem. I guess it didn't matter to the guy who welded it originally but it does to me my grandson is gonna ride it. So check...

My minibike welds were done when I was worse at welding, about 8 months ago, some of them at least. Are these OK, for arc welds?