The new electrical heart of my Arctic Cats. Their tailpipes run under the right side of their seats and center bars, and this electrical assembly will mount under their left. That extra blast shield on stilts reaches out toward the tailpipe, to further protect the front of the battery pack from a pretty hot section of flex-pipe. The blast shield on the second bike's module is in a different position to fit that bike. The battery dock fits Milwaukee M18, for a low profile 18v charge stepped-down to 12v. Exposed wires are silicone/fiberglass sleeved. Components are currently in a zip-tied jumble of regulator, fuse, and relay, to keep them tucked in behind the module's firewall. But each one of them hangs from its own grommet hole in the switch box, for ease of access more than anything. Pairs of hot and neutral wires feed from both the front and side, while two relay wires feed backward.
Attachments
-
1.7 MB Views: 45
-
1.7 MB Views: 48
-
1.7 MB Views: 47
-
2.1 MB Views: 42
-
1.4 MB Views: 44
-
1 MB Views: 40
-
3.2 MB Views: 39
Last edited: