Alright......long story short have a 1966 Kohler K181S that I intend to rebuild and slap back in the 1966 Wheelhorse Trator it came out of. So I want o "freshen up" the engine with all new seals, gaskets, and some new standard piston rings IF all looked good inside. Well it all did so I ordered up a kohler gasket kit with seals, and a kohler set of standard rings. Fast forward one year until today........................
decided its time to get it back together. So I start laying everything it and to my suprise there is something very odd with my set of rings. What should be a solid thick upper ring is two very thin rings in this pack. The middle ring looks right. The lower.................:shrug: Doesnt look like whats on the piston now. Numbers on book and box match for standard kohler rings.
My assumption is I got dooped on the rings?:doah:
Am i missing something here? Certainly dont look like the right rings to me.
decided its time to get it back together. So I start laying everything it and to my suprise there is something very odd with my set of rings. What should be a solid thick upper ring is two very thin rings in this pack. The middle ring looks right. The lower.................:shrug: Doesnt look like whats on the piston now. Numbers on book and box match for standard kohler rings.
My assumption is I got dooped on the rings?:doah:
Am i missing something here? Certainly dont look like the right rings to me.