Baja DB30 Help!!!

K

kingkoopa39

New Member
#22
#22
i just checked my bike and i doesnt accept cresent wrenches for unscrewing the clutch case i need some other tool. i'll describe the bolt and maybe you could help. the bolt is circular, and in the middle is a hectagon and thats where you insert the tool to unscrew
 
Strigoi

Strigoi

#23
#23
i'm guessing that you're talking about the set screw that holds the clutch on,.

it's an allen wrench.

go to your local hardware store, get some metric and SAE allen wrenches and pull if off (it's good to have both). they should have packs of each for fairly cheap.
 
F

Fullthrottle

New Member
#26
#26
Like Strig said "go to your local hardware store and get a set of Metric and SAE allen wrenches". Your going to need them. Their fairly cheap.






Together we stand-Divided we fall. Mini's forever!
 
cjtmini

cjtmini

#27
#27
the plastic clutch cover is held on with 6mm socket head cap screws. You need a 6mm allen wrench.

you did or did not receive the tool kit with the bike. every tool needed to take the bike apart is in this tool kit. they are cheap tools but they work

the chain should have 1/2 to 3/4 inch free play in it
 
You must log in or register to reply here.
Top