I'm almost done my Bearkat Twister build, does anyone have diagrams / knowledge / parts resources for the front fork assembly? I'd rather get advice from someone who has experience with one before I tear it apart and break something... Thanks!
I'm almost done my Bearkat Twister build, does anyone have diagrams / knowledge / parts resources for the front fork assembly? I'd rather get advice from someone who has experience with one before I tear it apart and break something... Thanks!
I'm almost done my Bearkat Twister build, does anyone have diagrams / knowledge / parts resources for the front fork assembly? I'd rather get advice from someone who has experience with one before I tear it apart and break something... Thanks!
The lower bushings are almost always found worn out. They are made of oil impregnated brass and held in with a set screw. I was able to buy bushings with the correct inside and outside diameters then had a machinist turn down a collar to sit in the fork tubes. The upper bushings are aluminum and held in with a roll pin.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.