Blue Clone Cam box stock 2

[doodlebug6.5]

Is this cam able to be used with stock springs, rods, and flywheel?

 

[CarPlayLB]

I use mine with stock springs, but I did upgrade to a billet flywheel!

 

[doodlebug6.5]

Does have a lot more power? And also will it fit the blue clone (greyhound)? Thanks

 

[CarPlayLB]

I also re-jetted the carb and put a header on it. I have never run a stock motor, so I have no point of reference! It runs pretty darn good though! Check with Chad, "minibikin" on the site. He works at OldMiniBikes warehouse and will steer you in the right direction. My privates are important to me, so I always run a billet flywheel on my ungoverned engines! Keep the governor in if you are not willing to spend the dough and the shiny parts!
If you are just changing thew cam and leaving the governor in, get a header and carb jet kit and you will have plenty of power! maybe even 7HP!:thumbsup:

 

[doodlebug6.5]

Hey Thanks for the info I already have the header but if re jetting the carb is needed Ill will look into that. Thanks again:smile:

 

[OND]

Any of the clone 196cc engines , blue, black ,yellow or red plus the hemi head predator cams all enterchange.

 

[doodlebug6.5]

Alright good, such a relief knowing I already ordered it lol Thanks.