I have a nice single bearing 206 Intek, the block has been blasted, honed, and painted... Just wash it down and it's good to go... The porting is nearly finished on the head, just a little more with some fine grit drums and then polish the intake port... I also have the stock bearing side cover..
I have the rocker plate for the head, I'll have to see if I have the valves yet and any other valve train parts... My initial plans were to use animal valve train components but put this project on the shelf..
$25 plus shipping
I have the rocker plate for the head, I'll have to see if I have the valves yet and any other valve train parts... My initial plans were to use animal valve train components but put this project on the shelf..
$25 plus shipping