intek

Hello all, I have a Briggs Intek 206 and I wanted to add a billet flywheel and con rod to it so I can safely remove the governor. Problem is, its box stock and I don't know what rod and flywheel to get. If anyone knows what length to get Id be stoked. Thanks!

I got a free 5.5hp intek 206 engine and was wondering what the difference was between it and a 6.5hp 206, im wanting to add performance parts but couldnt fint much info on it.

looking for a new carb for a 6.5 intek engine.these # are on the blower housing 4bsxs.2051 hf. 275821.Are these what i need to id this engine?

Parts for sale http://www.oldminibikes.com/forum/general-classifieds/136370-briggs-animal-intek.html#post1075170

I have some animal/ intek/ WF parts for sale. I would like to sell as a package but am willing to separate. Animal pvl flywheel and coil, World formula rod (used), animal piston with rings (barely used) and an intek crank. $150 plus shipping takes it all. 20161020_200718.jpg Photo by...

I see the 6.5 HP Briggs with blown apart pump off 6 year old pressure washer has plastic cam lobes! really! plan on putting on a monster moto mmb80 I got off cl ...guess it's just use it until it breaks then heave ho..how many Briggs engines use this? guessing this a low budget engine

Tillotson intake and carb, 6.5 briggs

Thanks to OwenD for shipping me the Intek 206 and a special thanks to CarPlayLB for "behind the scenes" feedback and suggestions throughout this build. The Intek is outfitted with Briggs Animal new and take-off parts. This engine is built to produce peak power and torque between 3600 and 4800...

have for sale a briggs intek 206 . head ported and polished stock valve train. arc billet rod. stock animal cam 256 lift. stock piston. cast aluminum flywheel . walbro 22mm carb . gov removed . custom header :thumbsup: needs intake and pulse fitting to finish $250 shipped

New Robertson billet rod for Briggs Intek.. $30 plus $7 ship

I have parts from a Briggs 6hp intek OHV. The intek has a similar block to the animal and some I the parts interchange. I had a briggs animal cam in it and wow what a difference. Animal cam - $25 shipped Stock plastic cam $8 shipped Blower/recoil housing $20 shipped Heat shroud $8...

So I picked up this Briggs 8hp Intek Pro for $60 today. I have a few questions.. What CC is engine? 305cc? Does it have a cast iron sleeve? Are there top plates/throttle kits available for this model? Does it share any parts with the Animal? It seems physically big and has a 1'' shaft which...

B&S Intek 206 6.5hp VALVE SETTINGS ??????????? have dial-up so cant watch vidios, does this model have adjustment, i didn't remove valve cover yet awaiting info? anyone know the exh. & int. clearence, i assume adjusted cold? i couldn't find instructions on this anywhere i looked? I think its...

Was on my log splitter. New carb leaks gas just like the one I replaced. So if you want the entire engine let me know. Complete engine and spare old carb. $50.00 engine complete, local pick up. There is still gas in it and would REALLY like to not ship. Thanks Dave

Just got this intek 206 2 days ago and runs great but noticed some small pieces of old grass and bits of something I feel should come out. I tried to look inside with a light but cant see much, no visable sceen? I hope theres not more junk in the carb. So is there a screen or filter and where. I...

Just got this intek 206 2 days ago and runs great but noticed some small pieces of old grass and bits of something I feel should come out. I tried to look inside with a light but cant see much, no visable sceen? I hope theres not more junk in the carb. So is there a screen or filter and where. I...

Looking for opinions on a build. I have a 6.5 Briggs Intek engine that will be going in my minibike. The bike will be used for 100ft drag racing, and little else other than some putting around the yard. Right now, there is no carburetor, and the only modifications are a short straight-pipe...

first post on this forum and like you guys im a minibike nut who loves building dangerously fast bikes that hardly have brakes :biggrin::scooter: I got a stock briggs 900 series which is based off of the LO206, a very nice engine for minibikes, and it needs to be more like a LO206 and less...

hey OldMiniBikes :thumbsup: i picked up a briggs intek 206 6.5 hp and i have a couple questions it has an electric start flywheel and i was wondering if i pull it can i put an animal aluminum flywheel right on? also want to replace the plastic cam was thinking stock animal like 256 lift does this work...