Brooks Trail Bike

oldsledz

oldsledz

Active Member
#1
#1
Their don't seem to be much info on the Brooks bikes, and I cannot find one that is the same as this one.

I can't find a photo of one with a rear wheel mount like this, it is the only one I have seen with a plate on the forks and springs, the decal seems different.
Is the gas tank an option? It looks like it was made for the bike.

It is hard to tell but it looks like the other photos I have seen have the same size tire front and back, this one has a 8 inch wheel in back and 6 inch in front.

This one has a 5hp Tec engine with lighting coil and a comet clutch.

The bike was blue at one time but looks like it may have been painted black at the factory, it is a nice paint job and is black under the decal.

In the brochures some say they have a hand and foot brake, this one has hand operated band brakes on the front wheel and jack shaft.

I have the tail light but the bracket broke on the way home.

 
Last edited:
zeeman

zeeman

Active Member
#3
#3
That's cool. I have never seen one, but I'm definitely not an expert on all the different minibike models. So, do you think it's a Survivor?
 
leathernun666

leathernun666

New Member
#5
#5
:drool::drool::drool::drool::drool:

Hey oldsledz did you hear that ???????? That was the sound of money rustling in my wallet trying to get out....It wants to go to you ..................:laugh:
 
V

VBrooks

New Member
#11
#11
Hear is my bike after being restored, i found the original red paint during the striping of frame rebuild, over owners bug boom job. I do have the snow ski for the bike.



 
V

VBrooks

New Member
#12
#12
Glad to see other brooks bikes exist out there, looks like info will
be hard to come by (history wise). I have tried to made contact
with Bradley Brooks of Production products, without much success.

Production Products closed there doors in 2001 or 02, They supplied
aftermarket parts for auto industry and appliance industries from what understand.
The P.P Building is up 4-sale, there some good photos of it.

Do any of you have a good photo of the BROOKS DECAL from
the FORKS or CLUTCH-GUARD, is there any difference
in the SIZE or design, Its to hard determine from the Brooks Brochure
Reason being I like to add 1 to mine. I would need decal
size measurements.
 
oldsledz

oldsledz

Active Member
#13
#13
VBrooks said:
Glad to see other brooks bikes exist out there, looks like info will
be hard to come by (history wise). I have tried to made contact
with Bradley Brooks of Production products, without much success.

Production Products closed there doors in 2001 or 02, They supplied
aftermarket parts for auto industry and appliance industries from what understand.
The P.P Building is up 4-sale, there some good photos of it.

Do any of you have a good photo of the BROOKS DECAL from
the FORKS or CLUTCH-GUARD, is there any difference
in the SIZE or design, Its to hard determine from the Brooks Brochure
Reason being I like to add 1 to mine. I would need decal
size measurements.
Click to expand...

I sent a PM with a link to photos of my bike, not all bikes have the same decal on the forks and mine has a Comet clutch cover.
 
You must log in or register to reply here.
Top