Crank drill and tap guides

[Scottyace]

Crank drill and tap guides


Is anybody still making the drill and tap guides for crankshafts?
I need a set to drill and tap two cranks @ 3/4" diameter, but if I could get a universal set to drill and tap 5/8, 3/4, and 1" cranks, that would be better for future use, if and when needed.
PM with prices if still available.


Thanks, Scott

 

[Scottyace]

Crank Drill Guide

Had one made local. It is for 1/4 drill bit - 5/16 tap. Drill guide only, for 3/4 output shaft. If anyone needs to borrow it, shoot me a PM.
Scott:thumbsup:

 

[hemigremmy]

Scott,
If I could borrow it that would be awesome. I went to bolt a clutch on a motor just last night and realized it wasn't threaded....DOH!
PM me if you want and I will send you my address.
Thanks again,
Ben

If you would post up some pics so we can see what you had made, always good to see home made tools!