Flash Chrome Plating

[1971_MB1A]

Any suggestions as to who may do a decent job at a fair price with a reasonable turn around time on Flash Chrome Plating ?

 

[Skipp]

Any suggestions as to who may do a decent job at a fair price with a reasonable turn around time on Flash Chrome Plating ?

There’s no reasonable turn around time….never

 

[creia]

It has been my experience that you will NOT get a "decent job", "fair price", and "reasonable turn around time" all together with chroming. Chroming is going to COST YOU and you are going to WAIT- just saying...
Michael

 

[ruppking]

Any suggestions as to who may do a decent job at a fair price with a reasonable turn around time on Flash Chrome Plating ?

I assume you know what "flash" chrome plating is. Any plating shop can do this. Your parts have to be ready to plate. all they do for prep is degrease them. All old paint, chrome or rust must be removed by you. The surface on your parts is what it will look like after plating. They do not strip, sand or polish your parts. The cost is very cheap for this as they are only plating them.

 

[sparkwizard]

If not properly prepared, buffed and smooth, your parts will be about as shiny as a paint can.