Fox Sprite brake woes

[RustyRedneck]

As some of you may know, I'm working on my Fox Sprite mini bike for the 2017 OldMiniBikes Build off. Anyway, I've run into a little snag. The rear brake pads have separated from the shoes due to rust. I'm curious if you guys know where I cold get new ones or how I can reattach the old ones. Thanks!

 

[buckeye]

Oh, that's ugly. Real ugly.

Somewhere on here is a real good tread on replacing those type of shoes.
That whole assembly is ugly. I thought I had rust.
Try searching for the thread. I think kustomkartkid did the thread.
Good luck.
You might start shopping.:laugh:

 

[markus]

looks lik a standard azusa brake assembly, I think most of the typical mini bike/kart even experimental aircraft vendors will have the replacements shoes for it. I think those are #2260 shoes

AZ2260 - Replacement Brake Shoes For 4-1/2" Brakes, Pair | Go Kart & Mini Bike Parts | MFG Supply

 

[RustyRedneck]

Thanks fellas! I'll be looking while the boss isn't!