ok I have a live axe Murray explorer. when the kids take off I hear this loud pop. there is no way that I can see to adjust the slack out of the chain. the axle is fixed. the secondary drive shaft is fixed. there is no way to move either sprockets forward or back. but I have about two inches of play in the chain (up and down direction). how do I tighten this chain? is this pop related to the chain?
as you can see the secondary drive shaft is welded to the frame. this limits the movement to left or right
as you can see the secondary drive shaft is welded to the frame. this limits the movement to left or right
Last edited: