H60 tag

[Joe51]

I have an used H60 Tag with factory rivets.

Model-H60-75003F
Serial 6173 04478

Could someone decifier this for me?.

Thanks,
Joe51

 

[125ccCrazy]

Vvvvvvvvvvv

 

[markus]

snowblower spec, 1966, non lighted, 1" crank, bushing sidecover.

 

[Joe51]

Thanks. Not sure what Vvvvvvvv means though. In any event, picked this motor up today from Ludicrousspeed. Nice guy.
Basically bought it for parts. At some point he had swapped out the crank and coil assembly. So I got it with a 3/4 crank, and lighted stator plate/flywheel. Best part is the block has a steel lined bore. I have a bearing side cover and crank. Going to Swap out the parts Sunday and put it aside for a future build.
Regards,
Joe51

 

[markus]

your right, It is a 3/4 shaft stock, I scribbled the number in wrong when I was looking through the book, so it was showing me the 30799 1" crankshaft. but all else shows the same, so the lighted wheel was an add-on (good score there) , good luck with it :thumbsup:

 

[125ccCrazy]

I looked up newer codes that came up with diff specs so I deleted it...VVV pointing down to Markus post.