Is this valve plate on correct

[Onetime]

6.5 Honda Clone

Not sure if this plate from NR Racing is upside down or not. Also what is the correct torqe for the two bolt that hold it on?

<a href="http://s43.photobucket.com/albums/e361/thiscush/?action=view&current=58006e3d.jpg" target="_blank"><img src="http://i43.photobucket.com/albums/e361/thiscush/58006e3d.jpg" border="0" alt="Photobucket Pictures, Images and Photos" /></a>

 

[Onetime]

Sorry, not sure how to add the photo

 

[JamnJM]

IMO they are called push rod plate. I'd doubt if there's an up or down side of that. But...???

IMO the slots should have been the wide width all the way.... but????

Or isn't there supposed to be bronze bushings on the push rods there to support them?

 

[Neck]

Are those the stock push rods?

 

[Onetime]

Are those the stock push rods?

Yes there stock.

I talked to NR racing. He said the plate is on correct, but I had to widen the gap a bit so the push rods could slide up and down in the slot.

 

[Neck]

I think, if your using a guide plate you need hardened pushrods.