T trj1234 New Member May 29, 2014 #1 May 29, 2014 #1 Hello guys, here is my jd2 model three tube bender build. Done myself with the plans, ordered the die and of course converted it to air hydraulic ram. 100_1877_zps1ca6a51f.jpg Photo by Jonester_2010 | Photobucket
Hello guys, here is my jd2 model three tube bender build. Done myself with the plans, ordered the die and of course converted it to air hydraulic ram. 100_1877_zps1ca6a51f.jpg Photo by Jonester_2010 | Photobucket
T trj1234 New Member May 29, 2014 #3 May 29, 2014 #3 A lot of work , need to purchase two more dies for it soon. 1 1/4" 4.5clr and 1" 4.5clr dies are expensive.
A lot of work , need to purchase two more dies for it soon. 1 1/4" 4.5clr and 1" 4.5clr dies are expensive.
T trj1234 New Member May 30, 2014 #4 May 30, 2014 #4 My two workshops I weld and fabricate in, roughly 25ft long. Going to add another 15ft for more space soon. http://i893.photobucket.com/albums/ac135/Jonester_2010/100_1659_zps443ab827.jpg
My two workshops I weld and fabricate in, roughly 25ft long. Going to add another 15ft for more space soon. http://i893.photobucket.com/albums/ac135/Jonester_2010/100_1659_zps443ab827.jpg