I am working on a mild clone for my Murray Track 2. Here's where I'm at so far...
HF 6.5
15cc Head - CYLINDER HEAD FITS HONDA GX 160 5.5 HP/6.5HP & VALVES - eBay (item 350374329004 end time Jan-12-11 06:16:24 PST)
18lb Springs
.265 Isky Cam
Billet Rod 3.303" (stock length)
8 degree adv timing
Everything else is stock at the moment.
I will end up purchasing a billet fw, even though I don't think I will be doing much rapping out on this bike/engine. I like 'em shiny. :drinkup: I envision this to be a low end torque bike for messing around off road.
When I heard about the Lone Star Round up in Austin in April (if it happens), I wanted to build this motor specifically for that event.
The engine will be accompanied by a gas Tillotson 334WX (blueprinted by KD). And once I find out where the curves need to be for the oddball Murray frame, hopefully can work with Tyler (Motormind69) on another header.
In case anyone wants to know what a 'mild' build like this sets you back, I added up $384 with everything I listed above. After shipping on parts and tax on the motor, I'd say about $420. Flywheel adds another $100. Hopefully I'll stop before I hit $600. :doah: Almost forgot, still need an intake for my carb. Add $40. Damn this hobby.
I will update this post with it's performance.
HF 6.5
15cc Head - CYLINDER HEAD FITS HONDA GX 160 5.5 HP/6.5HP & VALVES - eBay (item 350374329004 end time Jan-12-11 06:16:24 PST)
18lb Springs
.265 Isky Cam
Billet Rod 3.303" (stock length)
8 degree adv timing
Everything else is stock at the moment.
I will end up purchasing a billet fw, even though I don't think I will be doing much rapping out on this bike/engine. I like 'em shiny. :drinkup: I envision this to be a low end torque bike for messing around off road.
When I heard about the Lone Star Round up in Austin in April (if it happens), I wanted to build this motor specifically for that event.
The engine will be accompanied by a gas Tillotson 334WX (blueprinted by KD). And once I find out where the curves need to be for the oddball Murray frame, hopefully can work with Tyler (Motormind69) on another header.
In case anyone wants to know what a 'mild' build like this sets you back, I added up $384 with everything I listed above. After shipping on parts and tax on the motor, I'd say about $420. Flywheel adds another $100. Hopefully I'll stop before I hit $600. :doah: Almost forgot, still need an intake for my carb. Add $40. Damn this hobby.
I will update this post with it's performance.
Last edited: