Predator 212cc

[Predator212cc24]

I put a stage 2 kit on my go kart from OldMiniBikes and a billet flywheel my problem is it takes a lot of pulls to start it and most of the time won't start and when it does it automatically just wants to go can't get it to stay running and idle without taking off on me any ideas?

 

[BBQJOE]

I put a stage 2 kit on my go kart from OldMiniBikes and a billet flywheel my problem is it takes a lot of pulls to start it and most of the time won't start and when it does it automatically just wants to go can't get it to stay running and idle without taking off on me any ideas?

Gotta be something wrong with your linkage is my guess.

 

[Predator212cc24]

I don't have the throttle linkage hooked up it increase the the throttle on the carb off of turtle it just wants to grab and go it's as if I don't have neutral

 

[OND]

Sounds like your clutch needs cleaned and lubed. Chain to tight ?

 

[Predator212cc24]

No clutch is cleaned and re lubed chain is not tight I reset valve lash again it will start when I spram starting fluid into carb bug won't stay running and I have checked to make sure I'm getting fuel to carb and I am and once again when I start it it automatically starts spinning the rear tires