The 6.5 clone

[blackrebel]

On the 6.5 clone thats sold at harbor freight,Is there a way to modify it so when you tilt the bike over towards it dosent die?

 

[elbasquo]

Remove the oil sensor.

 

[bandit 40]

On the 6.5 clone thats sold at harbor freight,Is there a way to modify it so when you tilt the bike over towards it dosent die?

or ,if you dont want to open her up just cut and bypass oil sensor:smile:

 

[Strigoi]

if you choose to remove the oil sensor, it's only 2 bolts once you get the side cover off and sits in the bottom of the case. there's a chance that the cam may come out when you do that. if it does, be sure to get the timing marks lined up when re-installing it.

 

[blackrebel]

Thanks. I just don know where its located at on there motor

 

[125ccCrazy]

Thanks. I just don know where its located at on there motor

it's inside the engine, do like Bandit said and just cut the wire coming from the block if your not sure about taking the side cover off to remove the low oil shutdown switch..

 

[BajaBlitz]

Here is some pictures

Oil Sensor External - before

Oil Sensor External - after

Oil Sensor Internal - before

Oil Sensor Internal - after

 

[blackrebel]

Ok. Thank you so much.