im not restoring it. 3 years ago it ran perfect and had alot of potential and looked like a small chopper. but the guy robbed it of all the good stuff to make a different one. i have never had a bike before and this really dont need that much work done. just the wiring is a mess and the biggest task.
the harness is fine i have been outside with it all day rerunning wires. it was pretty much common sense it just had a black tube that looked like a giant phone cord tying up the cords. judging from the frame do you know about what it might be. it has a swing arm welded on which was not factory. the forks were not factory. so in total a different little mini all together when its done.
I say if it keeps you busy and out of trouble then it's a fine project. No aftermarket parts or support for those but you will never run out of parts given how many end up as junk. And if you find yourself needing a #35 chain sprocket adapter for a 4 bolt metric pattern china wheel I have a drilled sprocket and machined spacer already trued up on a wheel that runs perfect. Let me know.
