ok just recieved the adapter plate to put a predator on a doodle bug, gen 1.
slots in plate measure 80mm centerline original slots on bike 62mm....ooops! will call on monday, anyone else come across this?
mark
Need help figuring out which air filter adapter for angled air filter will fit a new Harbor Freight 212cc engine. There are many on ebay, but have no idea which will really fit without modification. Any help would be appreciated.
Im using the stock carb and bought an adapter. Of course the studs are too short. What (where) is everyone using? its a tapered stud, thick to thin. Thoughts or ideas? Thanks.
I new at the stuff so please forgive me if i ask a stupid question. My son has a mb200 with the stock motor and I bought an air filter adapter kit. What I didn't notice until I started working on it is the vent tube. I didn't order the filter with the vent tube built into the filter. So how can...
I'm looking for the coil adapter to run a 3hp flywheel on a 5hp Briggs. If anyone has one they would like to sell, or know where I can get one please let me know.
Thanks for the help
Vic
I ran this setup for awhile on my old DB and didn't have any issues. Don't know if it will fit the new style ones or not. It was bead blasted and rattle canned powder blue/black (I had a vision, haha) and has not been used since then. The sprocket is for #35 chain. This is one of the OG ones...
Hi guys i have a carb i wanna put on my 6.5 clone, but i dont know which adater will work or will be the closest i measured bolt to bolt inner diameter and i got 1 7/8 inches. Is there an adapter that will work ?
did this for 2 bucks. I used the thick gasket for a template and a drill press. I had to shave the side for the gas shut off. Fits well and i ordered a 2" ID air filter pod for 5 bucks off Amazon. 7 dollars total.
I have been using a random set of screws and nuts to hold the sprocket onto the adapter, but after riding around for 1 month the nuts became loose and flew off, Was wondering what kind of hardware should be used to secure the adapter plate and sprocket.... thxs!
Looking for angled carburetor/intake manifold for two Briggs & Stratten engines. One is a very healthy 2HP flathead with the carburetor that has a built in gas tank and the other is a 6HP OHV with the bowl-style carburetor. Both engines are being used on frames that have tilted engine mounts.
affordablegokarts: Air Filter, UNI Dual Layer
ARC Air Filter Adapter - ARC6934
Does that air filter adapter require the 2-7/16" filter? I know that's what the air filter adapter on AGK requires, are they the same size though?
Thanks
I recently purchased a Intake and air filter adapter for my Harbor Freight Predator?. The ARC Adapter I purchased looks like this:
Is this the correct piece for the Predator? The bolt on the bottom side of the carb isnt long enough to get a nut on because the adapter is too thick. I hope...
just wondering if there is a way around the adapter plate, just ordered a bunch of shit and over looked the adapter plate, just curious if theres a way around it or if i should just order it, thx
I am looking for a Chain Guard Adapter that mount on the motor and the chrome chain guard mounts to it. Rupp part #10446. I paid the long dollar for the chain guard and now I can't mount it with what I have on my motor. I think the one I am looking for was chromed originally. i have Cash...
Does anyone know if anybody sells an air filter adapter for the DuroMax 16hp engine (420cc)? The bolt spacing is approx. 2.050" c-c. Also, what carb. mods. need to be done after replacing the factory air filter setup with aftermarket adapter and filter? Please be specific. Thanks.
Has anyone ever used/thought of using a router for woodworking as a milling machine?
I’m doing a engine swap on my Doodlebug and I’m planning on drilling out the slots instead of using an adapter plate. Then using a wood-router with a milling bit to clean out the slots. Has anyone ever done...
This doodlebug was used VERY little. The kid outgrew it SO fast, and although I ride it a little, I am "trimming the herd".
It's got a brand new (less than 10 hours run time) 6.5 HF motor on it, but I let it sit for 8 months, and it won't start. Needs carb cleaner or something.
ALSO, it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.