Here are some of the pieces that will be going into my Bonanza build..
I stretched the jackshaft plates so I can run a 2 speed set up
The MX tank was one of Mac's shells I finished so it is functional
I started assembling the engine last night, its my "Intek WF"
Intek 206 dual bearing block .020 over
.020 World Formula piston
WF crank
ARC beefy rod
308 grind wf cam
red pvl ign and flywheel
Not sure about the head yet... I have the intek head milled .060, ported, animal valves, springs, locks, rocker assem but I'm also leaning towards a WF head...
The bike is getting TH 5 spoke wheels with 530-6 tires
short MX seat
The 5hp flathead on the bike in the pics is going on a wild goose
I stretched the jackshaft plates so I can run a 2 speed set up
The MX tank was one of Mac's shells I finished so it is functional
I started assembling the engine last night, its my "Intek WF"
Intek 206 dual bearing block .020 over
.020 World Formula piston
WF crank
ARC beefy rod
308 grind wf cam
red pvl ign and flywheel
Not sure about the head yet... I have the intek head milled .060, ported, animal valves, springs, locks, rocker assem but I'm also leaning towards a WF head...
The bike is getting TH 5 spoke wheels with 530-6 tires
short MX seat
The 5hp flathead on the bike in the pics is going on a wild goose