What are these 2 little nuts for? One each side of the output shaft with a little white bolt sticking out the middle of each one. None of my other tecumcies has these.
Thanks.
those are the roller bearing retainer clips,there is a slot on the top of the threaded end,turn one clockwise and the other counter clockwise if I remember right. after you do this the side cover will come off.
those are the roller bearing retainer clips,there is a slot on the top of the threaded end,turn one clockwise and the other counter clockwise if I remember right. after you do this the side cover will come off.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.