7hp

Im Willing to sell...what's it worth??

Had to switch-out the original carb on an H50 for various reasons. I do have a 7hp Oregon-marketed version on the shelf. Throttle plate is of the "push" variety rather than "pull" for the OE carb. Can I get some guidance on which assy. or collection of parts is needed to work with this carb...

clutch or cvt? looking for a top speed ~ 70mph, gear ratio of 5-1? rear tire diameter will be ~ 26" flathead engine will have governor removed, mikuni carb and header - not trying to break 5k rpm's will be used for fun commuting and country road cruising because this will be driven on public...

Anyone using the 7hp duromax? I can get for cheaper than a predator 212. What are the benefits or drawbacks when the duromax is compared to a predator? Thanks in advance

I have a 7hp Powerfist engine like it says in the title but after making a post awhile ago apparently the 7hp just have a bigger bore or piston and I am curious if a stock GX200 head gasket is big enough or will I need an oversize? The CC is 208 on this engine. I took the head off already and I...

Ain't nothing like pulling up to you're house n a giant crate is on the step ! Little early as parts are still rolling in but here she is. New in crate yanmar 7 hp , I was told the torque is tremendous on it . ( 100+ mpg?) . My name is Pete I'm returning after a few years out of the loop. I need...

I have a Powerfist 7hp and I just finished installing the billet flywheel and rod but I am just curious if removing the governor is optional? Like is it possible to rev the motor to say 5600rpm or will it actually restrict the rpm? I don't know if I am explaining this clearly enough but if you...

I bought this engine a few weeks ago on craigslist. I cant figure out how many hp it is. Here is a pic of the engine cover

This stuff has been waiting for me to get an engine for it, and it ain't never gonna happen. Give it a good 3,600 rpm home, or its your turn to let it sit on a shelf. $20 bucks PayPal-Gift U.S.48 shipped.

A member made these a few years back. They are 7HP Tec billet rods. This unused...not passed around to oogle. I paid 150 plus shipping....you can have it for the same. It is 1 of like 35 made. I went with the original motor on my Harrison...so it just sat in my tool box. Any questions or...

Hi Guys, Another Tecumseh followed me home this weekend.. Looks to have started life as a Craftsman snow blower engine. Model number 143 606042 serial 9191 16628 which I believe equates to a 7hp. Is this a H70 or HH70 7 hp engine? Differences? How old would you guess? It has adjustable carb...

modified with 7hp Robin/Subaru