arms

Well, it's been a while since I've posted anything. 8 only ride my bike once a year and then it's daily for about 2 months. But, back to the point. I decided it was time check valve lash and found that my exhaust rocker arm wobbles and the nylon valve guide appears worn also. The engine is a...

I made up a few Taco 44 flat swing arms and taco fork triple trees .....the flat swing arms a weld could be added to make them perfect but work just fine with out .....$40 shipped as I only have a few .......The triple trees are $35 shipped as I have many .....im full on OldMiniBikes file photos so e...

looking for a pair of the flat taco 44 swing arms or contact of anyone that makes them.I have a US shipping addrss

I have a Fox Sundowner and am missing one drum break actuator arm. The cam pin is splined instead of square like the Rupp cams are. I've seen lots of splined actuators for motorcycle rear drum brakes on ebay but I don't know if they're the same size. Has anyone used a motorcycle drum break...

I am in search of at the very least this particular choke lever arm, but would be interested in the entire carb as well (even if its toast) to get it, this is the only style I am in search of. could use a few of these if I can find them. I have a contact that will be at windber as well that...

jeep4me gave me a briggs tank that had some rust in it a while back. I asked how to remove the rust and he said to put a handful of nuts in and shake till your arms fall off. I did and it worked but yep, my arms were tired! Yesterday I pulled a briggs tank off a motor and it needed...

Looking for 2 set of mounting studs for the cast type champion rocker arms. A dealer sold me 2 sets of rocker arms to go in a clone 6.5hp engine but did not send me the mounting studs , said that he didn't have the studs and would have to order them. didn't make much sense to me but that's what...

how do these lower arms come apart?

Looking for swing arms! 1 mid peg 1 front peg

FREE>>shifter arm, shocks and kicker arms<<FREE kicker arms fit Honda 50, 70, clones, etc.... shocks fit whatever you want to make them work on.. folding shift lever fits Honda 50, 70, clones etc second thought, if anyone wants any of this just pay the shipping... cheapest fastest...

I'm looking for a couple different disc brake arms. If anyone has anything sitting around, please let me know. I'm trying to help a friend get a brake on his bike and we're not quite sure which to use. I know there are some variations in the angle of the arm so I'll probably be interested in...

I am looking for a set of champion rocker arms for my 6.5 clone. Anybody got a set for sale?

Were 1970 Rupp swing arms the same throughout the model line up? I know the frame changed in '71. I'm curious if the swing arm off a 10" wheel Roadster, for example, is compatible with a 6" Sprint wheel, and if it would still be correct. Thanks for your help. furyus

so i just bought a gx160 14cc head and 1.3 billet ratio rocker arms from AGK and it seems like the stock push rods aren't long enough to even come in contact with the rocker arms (rocker arms screwed all the way down) do these 1.3 billet ratio rocker arms require longer pushrods? or...

Does anyone have pics of reinforced stock ratio rocker arms for clones? I would like to see a detailed pic of the reinforced areas, as I may consider having a friend weld mine up for me.

I understand the basic function of the rocker arms. I want to know what 1.1-1 or 1.2 or 1.3 ratio arms do compared to one another. What does a stock gx200 have? Can you get gains by just upgrading these and not the cam?