azusa

hey there guys looking to sell my basically brand new Asusa mini bike. I have been away at college but the bike was stored in my basement, while being there it developed a little surface rust on header tube, and wheel spacers, nothing 30 seconds of steel wool couldnt solve. Bike was stored after...

azusa build tank mount

azusa build tank mount

azusa build tank mount

azusa build tank mount

azusa build tank mount

azusa build tank mount

azusa build tank mount

Ok fellas ...everyone wants pics.....I took some today! So far I have added 2 inches to the kickstand.... Removed the fuel tank from the Predator....and cut the ears off the engine. I added a grease fitting for the neck assembly bolt area... Added little tabs that hit the lower frame...

fabrication of bracket for tank mount

tank bracket installed

Mockup of Bike with tank installed

Im looking for advice on the engine i just built for one of my minis. I started with a greyhound 5 bolt head motor. I added an afg 14cc ported head, flat top piston, cl1 cam with 18lb springs, a port matched brute pipe and a uni filter on a stock carb-92 main and the 140 emulsion tube. I have...

I was wondering if anyone could post a close up of the azusa kickstand and point of attachment at frame....just found out the one that is offered at OldMiniBikes in the kit selection menu is too short for the 8 inch wheeled bike......but its being sold with it....ARRRG....guess who bought it ....hahah...

Hello, We just added some new items to the store. Seats: 12" Azusa mini bike seat: https://OldMiniBikes.com/12-Minibike-Seat.html 19" Azusa mini bike seat: https://OldMiniBikes.com/19-Minibike-Seat.html Posi-stop disc brake assembly...

Just checking to see if anyone here has an azusa go kart kit. Might get one after I complete my minibike. Any pictures with people in them? :scooter:

So been doing some research and it looks like the HF 6.5 engine will fit on the Azusa new school frame. The bike currently has a Techumse engine that is a 3.5 hp engine and takes for ever to warm up. The issue is that I have DB30 with a 6.5 and my other son has a Western Flyer with a 6.5 and the...

What a deal!.....I need a set of the old rear azusa 4-rib alloy 5" wheels for a 1" stepped axle (kart).....this is what I have to trade (see photos).....first photo is a set of good kart 5" front wheels and hubs, a set of margay 62 hubs, a set of 1 /14" axle hubs, and a set of mis-matched alum...

Anyone using a different break set up on there azusa bike? Any suggestions?

The Azusalite wheels and drum sprocket I'm working with are junk, tried all of my sprockets and three wheels with the same result. They will not run true and the riveted ones are the worst, the wheels are even off and I've checked and double checked the spacers for square. Nothing I do makes any...