blown

I dragged (another) old Ariens snowblower from the side of the road in nice shape, electric start, gas tank clean. It has a snapped rod. I knew this and hoped it didn't take out the piston, but it took some skirt off. The engine is H60 75003H 8163 Looks like the rod is 31380C Piston 33312B...

I may have started this thread in the wrong section before. So I have a 6.50 Chipper Shredder Vac by Troy-Bilt that I did a repair of the bottom oil seal. Also replaced the Magneto due to no spark after I reassembled the entire machine it was still leaking oil from somewhere under the...

I believe I pulled the bone head play of the season... Will oil from a blown top seal, short out the coil of my 6.5 Briggs & Stratton Vertical shaft small engine?

I saw this on Ebay, but didn't look at all the pictures until a few minutes ago. I'm guessing the bidders might have done the same. I know it has a lighting coil/flywheel, and that 631588 diaphragm carb is worth a bit, but who pays that for a blown engine? That's at the top of it's value in my...

Need to repower my apc mini chopper. I believe original motor is 33cc. Will a 43cc motor bolt up with no modification?

Is there any way of telling if an engine is blown? I have a 6.5 horsepower briggs and stratton intek engine, I was riding my minibike and it suddenly stopped. Ever since then my engine will not turn on, I pull the pull started but I feel no resistance. It feels as if no spark plug was there. I...

Here's my blown Honda ST70 (European large headlight version of the CT70). Lots of mods, bored and stroked to 119cc, Kitaco cam, semi downdraft inlet port, Takagawa forged piston, manual clutch conversion with stronger springs, shift pattern altered, 26mm carb, larger bore Honda SS50 exhaust...

Here's my blown Honda ST70 (European large headlight version of the CT70). Lots of mods, bored and stroked to 119cc, Kitaco cam, semi downdraft inlet port, Takagawa forged piston, manual clutch conversion with stronger springs, shift pattern altered, 26mm carb, larger bore Honda SS50 exhaust...

I found this on CL of all places.Everything is remanufactured. V Power Equipment Scott

I have a 1979 Minitrail 70. I have had this bike since I was a kid and the headlight has never worked. I am in the process of trying to restore it and it is blowing headlight bulbs left and right. I put a bulb in and it will blow within 5 mins. Any ideas?

ok i was wanting to know if i hook my throttle cable (which i have already done) to my gov arm coming out of my motor will that make the gov not work? i have heard some that it disables the gov and also heard it doesn't disable the gov... so does it disable it or not?...

i started taking my hs40 apart to get it ready for sand blasting... and i noticed that there is a lot of black stuff near one of the corners of the head/block.. also noticed that the head bolt on that corner was covered in oil. is that a sign of a blown gasket? or something worse...? inquiring...

Hey guys, so I scored a real honda gx390 for 125.00 bucks today. At least I thought it was a score. The motor fired right up and ran good. It came off a power washer. When I got it home I noticed black soot or oil right under the muffler right where the head meets the block. So I started it...

I have a 6hp ohv power sport it runs perfect at high speeds but when ipush the gas hard the head sprays oil all over the whole back section but only at higher rpms is it the head gasket my engine has small mods and runs faster than stock please help me

any one want to get rid of a 6.5 blown motor

any one have a bad clone for sale :out: