bolt

Hello all, I have a tecumseh engine, H35 45281h, it is a 3.5 motor from a snowblower. I'm using it on my minibike. I installed a new clutch, 3/4" Hole #35 chain with 12 teeth, and wanted to add the outer bolt that holds on the clutch but can't seem to find one to fit. I was told that the two...

Ok, so I know for sure that an intake manifold I bought specifically for a Briggs 5HP Flathead from EC Dist. is 1-3/4" bolt spacing and fit on my engine just fine. Another member told me that his bolt spacing on his Briggs Flathead is 1-1/2". What the eff, mate? Why are there two spacing...

Hey guys, I searched around and cant get a straight answer on the gains that Bolt-On Kit 1 from AGK gives you. The kit includes an air filter + adapter, a header pipe, and a #90 jet. I currently have a 6.5 clone running 93 octane fuel, 10-30w synthetic and have a "racing spark plug". Those...

Direct bolt on headers. http://www.oldminibikes.com/forum/mini-bike-parts/42451-performance-pipes-sale.html

I'm building a stock Azusa kit minibike (6-inch wheels, 72t sprocket w/drum break assy, 13t clutch) Well I've got the Hilliard Extreme Duty clutch that I'm test fitting on my Harbor Freight 6.5. I don't have a lot of spare hardware laying around to test thread sizes, however the output shaft...

Anyone know the bolt size for the extra holes in the oil sump surrounding the crankshaft? I'm trying to attach a chain guard. They arn't listed in bolts and torques. Thanks for your help!

I know I have to torque my head bolts to 140 but what sequence do I tighten the bolts in?5hp head

what size bolt goes in to crank to hold on clutch

Hello; can anyone please tell me what the torque specs on the head bolts for a Tecumseh motorsport model 9994 in ft. pounds? Thanks

hey guys i need a rear sproket 68-70 for a 4 bolt hub. also i bought a clone engine and the fuel tank was to tall for the frame, so i also need a cylinder fuel tank no more than 4inches in diameter. let me know. ill post pics in the morning to let you know what im workin with. thanks (im...

hi all - i cant figure out the correct size bolt to put in the jf - 168 motor to secure the clutch and spacers? I know this may be a stupid question but i have tried a bunch of different bolts and i just cant seem to find the correct threading and size. FYI - im building a true tote goat for...

looking for my del.to R.I."valve cover and rockers"not sure now who it was? let me know if you see this post!did u get the check? thanx JF

Does anyone know what size bolts fit in the 4 holes around the shaft og a Harbor Freight clone? I'd rather not bring the whole engine into the hardware store. KingPaul

OK.. I ordered like 20 of those flathead throttle hookup kits. In order for them to work I need that shoulder bolt that goes into the side of the carb, most do not have it (the one the throttle/tank spring from the kit is supposed to go on).. My question is .. What is it called and where do I...

6.5hp clone whats the tq specs on the head im doing a 14cc head swap. thanks

I'm am looking for a muffler assembly for a Bonanza with a 3.5 HP tecumseh. I want a 2 hole bolt on, long tube type. They have them on Ebay but they are for the slanted Rupp engines. I saw one on Ebay once but I missed out. Send pics if you have one. Thanks

I need to know the head bolt torque and connecting rod torque on my 11hp 25 hundred series Briggs and Stratton is for a race lawn mower im working on Thanks in advance

I'm looking for two front fork bolts for the DB 30. The Baja parts manual list it as M10x165x1.25. I ordered two from Baja and they are to short. No hardware stores carry metric bolts that long. ANY HELP or Ideas will be greatly appreciated. Thanks

I was wondering if anyone knew the part # for the bracket that locks the rod bolts???

Finally getting to the finish line.....some paint and misc tweaking and she should be ready to rip. Thought I would shake up the Taco guys.....and add Go-Power wheels. If it don't fly,there's always the Azusa Tri-Stars in storage. And it won't be Red.........a dark metallic blue should work...