brakes

I picked up my 67 Street Scamp (possibly the Trail Tramp or Scamp, whatever it's called) and I need some brakes. I was told that Airhart brakes might work (possibly now used on Manco)? Anybody know for sure? I've found a few on eBay, but they don't look like they'll bolt up. I was told they...

Never got around to using them until today :)

Let me start off by saying thank you OldMiniBikes WAREHOUSE yall never let me down. Hello fellow mini bikers. What are you guys working on. For me it my tav replacing brakes and all fluids. Oh and I got a set of some cool street tires.:facepalm:

Does the stock 212cc Hemi Predator engine have more HP/torque than the stock 196cc clone that comes on the Baja Warrior? If so, how much? How noticeable is the difference when riding? Am I better off modding the stock 196 or would I be better off getting a 212 Hemi Predator and modding it...

Here is a dunecycle for sale. This is a small frame size, Seat fiberglass bucket is real nice with alot of color still in it.Has diff with brakes. Asking $225 No Shipping Will meet if not to far.

Got very little in it . Any idea what it is ? What kind of brake system should it have ? Currently no brakes . Enginewas supposedly just rebuilt with no hours

i have a golden pinto mini bike with just the foot brake on it. im gonna be putting a seriously fast motor on it and was wondering if i could put front brakes on it some how. (check it out in the project logs)

Hi guys, I have a few questions. Does anyone here use disc brakes with a mechanical caliper? How good does it work compared to hydraulic? What caliper do you use? I ask these questions because I'm looking to simplify my next build.:shrug:

My buddy picked up a super bronc doing some trading. I saw it thought it was badass told him me being a motorcycle guy I had to get it for my kids. It will look way cooler than if they're driving one of them stupid mopeds. But now the problem it is only a rolling chassis. It has the 12 wide...

Guys, I'd like to start repoping 2.5" jackshaft brake setups for a few of the more popular mini bikes we work on here. I'm thinking of doing the Trail Horse, Heathkit Hilltopper, Ruttman Pac Mule and a generic one. Let me know your thoughts if you are interested in obtaining some of these...

I have a brake caliper that is missing the bolt to hold in the line i was wondering if this is the correct bolt Break Hose Screw 10mmx29mm :scooter:

I've been reading these forums for a long time, and started a new project and need your expert advice here.... I have a 1970 K&S Hornet... I have all OEM parts, but the problems started when I tried to rebuild it... Pretty much everything is shot in some form or fashion. The only things...

I'm going to hook up brakes to my old Cat 400X. It has no braking system presently. Should I try to order the original braking system or order a band brake system. My kids are going to ride this bike, so it needs brakes. Thanks, Ponytail:scooter:

I`ve sanded, cleaned, re-installed, and pretty much tried EVERYTHING to fix my :censure: brakes. I always have had bad luck with drum brakes but I`m sick and tired of this. I got a hole in my rear tire which gives me an excuse to remove it and the repair it. I`m not a expert at minibikes but I...

Hey what size band brake does the super bronc vt 8 use on the clutch brake that stops the rear tire , I smoked mine doing some rough trail riding , the ones I see online are a lot wider and longer than the one I have on it , thanks ahead of time

I need to install new wheel bearing in back hub of a Scat Cat, I tried to hammer then out and no go??? It appears to be a bearing & a spacer & a bearing. I dont want to break anything!!! Anyone got any ideas?? Do they need pulled out???

I Ordered hydra brakes for the MotoBug This Morning.:thumbsup: Woo Hooo Can't wait to try them out:scooter:

Im looking for some brake ideas. I was originally gonna build a disc brake setup for my jackshaft. Overlooked the fact that my jackshaft is gonna land an 1-1/2 from my swing arm pivot. I running 10 Azusa astro wheels.

I'm trying to put a drum sprocket brake on my mini bike but I have a couple questions. If my sprocket is 5 inches across should I go with a 5 or 4 1/2 drum brake? or Smaller? Also, I'm interested in putting an air intake on my Tecumseh H35. I know there are very few after market parts made...