choice

Hello all, I'll make this short and sweet. I have a KENDA 4.00 - 8 tire, mounted on a 8 x 3.75 wheel as my rear wheel that I am more than happy with. I was wondering if you guys could give your opinions / suggestions on what would be cool on the front. I'm having a little problem digesting all...

Looks like a Nice choice of 4 Engines MINI BIKE ENGINES FOR SALE

Getting all the parts together for my need build now. Going have a Weisco 2.815" piston and the Arc .175 stroker crank, should be sitting around 235 CCs. Looking at either going with a TM24 or a TM28 for the carb and I'm curious what everybody else's opinion on carb choice would be. Just worried...

Sensation chopper. how do I get all the powder coating off? The brake doesn't touch the back wheel either. Need a taller tire and the rim seems to be a little thin. . I am thinking a slick is my best worst choice (the slick looks best and the grip on the scrub brake worst?) but my choice has...

where do you get the black mamba sr cam nobody seems to have them in stock and whats about the dyno cam is it a good choice

I have a governed 212 predator on a doodle bug. The issue I'm having is because its geared so high when you goose it the bike will want to flip out from underneath you. I have a 12 tooth clutch on a 70 tooth rear sprocket. My question is would I loose too much acceleration by drooping to a 54...

Wife is wanting a tablet. She surfs Pinterest and girlie stuff. If you were to buy your wife a tablet, what would you buy? 250-300 buckaroo range or is that a ya get what ya pay for? Thank you in advance.

I have a bsp engine that installing on a custom pit bike. Im wanting to put a cam in the engine and wanting some input on what cam would be best. What I have so far is a bsp engine with a arc billet rod +.010 longer, billet steel flywheel, 18lb valve springs,carb jets bored, staged pipe and...

So i was wonder if i buy a 4 inch rim do i get a 4 inch tire ci just want to know how to get the right size tire

HF had them on sale and with the 20% off coupon I got one of the 5lb tumblers for just under $40 (thanks Larry for the heads up). I bought some walnut media to start off with for some brake levers I am cleaning up from a dirt bike. What I'd like to know is what media to stay away from if...

It's starting to look like the 5hp Briggs donor engine for the grandkids yard kart project may have been previously abused more than I first thought and that a $99 clone will be cheaper in the long run ( visual inspection reveals there's a good possibilty that the Briggs needs guides, seats and...

So I am building my clone up more for serious lowend and I'm going to run 26lb. springs and a 280 cam. The question is how much of a lift can I get on a 14cc head and .010 gasket? I am trying to run at least 1.2 rockers on it which will make it i believe 336.

what fuel pump should I use to get the fuel to my mikuni clone on my 5hp briggs? One of the mikuni pumps is rectangular and has 1 outlet and the other is round and has two outlets. which one do I get?

I am having a shop do some powdercoating for the kart, dropping off the pedals tomorrow and will be talking to him about the wheels next. Now the tough part is what color Here is how it looks now with white wheels Not paying extra for anything fancy so we are only talking about gloss...