chrysler

  1. Ding Ding

    Chrysler/West Bend 820 flywheel screen

    Looking for the screen that protects the flywheel. It is formed to fit around the starter cup as seen in pics. Let me know if you have one. Thanks
  2. S

    chrysler powerbee 82015

    So I have this engine and I have been tinkering with it. It has a HL189A tillotson carb. Allegedly this engine is a 6.4 hp off of a 69 snopony. Does anybody know anything about these motors? I have a carb rebuild kit coming in the mail. Are these Carbs gravity fed?
  3. V

    Arctic Cat Screamer on eBay 170304

    March 4th, 2017 Vintage 1971 Arctic Cat Screamer mini bike chrysler two stroke 8hp | eBay Ad headline says 1971. Body of ad says 1972. 1971 Arctic Cat Screamer mini bike Chrysler two stroke 8hp This is a 1972 Arctic Cat Screamer mini bike. This is a the performance Cat offering for 1971...
  4. jeep4me

    Chrysler 58011

    Recently picked up an old standup ground compactor with a 2-stroke Chrysler 580 on it. Just curious if the horse power this little thing puts out. I'm guessing around 6-8hp but not certain.
  5. A

    Chrysler SnoRunner

    Took a nice ride on the Chrysler SnoRunner the other day. I have a video but it don't look like I can post it. I bought the thing a few years back for eighty bucks. It needed a front ski, fuel coupler, air cleaner, drive track and recoil. I probly have less than $375 into it. The thing is a...
  6. t-royMN

    chrysler 82015 - how to remove the clutch

    i have Couparral - Chrysler 82015 engine with the original snowmobile clutch attached. How do I remove the clutch? Looks like a Salsbury clutch for belt operation. Thanks T-roy
  7. Mark G

    Chrysler Snorunner Sno Rabbit MINT LIKE NEW

    1980 Chrysler Sno Rabbit, absolutely mint 100% original survivor. I bought this a few years ago from the original owner. His family bought them new for their cabin and used them only ONE weekend and put them away in the basement. Shortly after, the father became ill and the cabin sat dormant for...
  8. JohnnyTillotson

    Never know what you'll find at your local lawn mower repair

    Chatting up an old guy at his repair shop buying fuel line yesterday. He's closing down He says. Told him im restoring approximately 53 minis n karts and he said i could look around. On the top shelf of a parts bin tucked away i found this Chrysler Power Bee 580. He's like oh yeah i used to...
  9. Harleyreg

    Chrysler Sno Runner - Winter Mini Bike

    This has been sitting a while. The off/on switch is missing the inner piece and it could use some replacement cleats on the track. Motor has compression but the recoil is weak - it needs some help to rewind the rope. With that said, it's in nice shape. The tank looks clean. Seat is in good...
  10. chrysler sno runner nos

    chrysler sno runner nos

  11. chrysler sno runner nos

    chrysler sno runner nos

  12. chrysler sno runner nos

    chrysler sno runner nos

  13. chrysler sno runner nos

    chrysler sno runner nos

  14. t-royMN

    PowerBee 82030 $210+shipping

    I bought this engine, but then realized it had the wrong rotation direction for my needs. You get what you see. It has good compression when I turn it by hand. Not much more known about it. $210 + shipping and I break even. PayPal only, please. Thanks Troy
  15. t-royMN

    West Bend 82001 or 82002

    Looking for a CCW rotation engine (when looking at the drive end), with pull start on right side. I have a Power Bee 82030 that I want to sell or trade. It has a CW rotation, which doesn't work for my minbike needs. The engine for trade has no carb, but has good compression and I have a set...
  16. T

    Chrysler Sno Runner

    Chrysler Sno Runner
  17. Peekster

    Barn Fresh Chrysler Sno Runner

    Here is a nice sno runner. I got this from a friend years ago and never did anything with it.Complete and looks good. I have a few extra parts for it. I have not run it but dont see why it wouldnt. Tank has minor surface rust that should wash out easy. Asking $ 600 No shipping but will help any...
  18. brown boonie

    west bend 820 block/engine needed

    I'm looking for a good west bend 820 block or whole engine. my engine has a broken block, I need it for a trapper mini bike. if any one has a block or whole engine they don't need please let me know. thanks.:bowdown:
  19. The Restore Kid

    DAMN CHEAP Chrysler in Missery

    SNOW RUNNER BY CHRYSLER
  20. Evilution

    Mini Chrysler Tomahawk

    2010 X-Racer
Top