conversion

  1. markus

    coil conversion 5hp flathead

    last few points briggs I have gotten had the "magnetron" ? installed on them. From what I see you just simply install the coil and snip the wires coming from the points unit....or at least thats what looks like was done on the engines I had :shrug: Just want to verify that, I popped the...
  2. J

    Engine conversion

    I'm converting the stock B&S engine on my Tote Gote to a 5.5 hp honda engine. I need to cconvert the 3/4 inch Honda shaft to 1 inch. Where is a good source to buy a sleeve and step key to accomplish this.:laugh:
  3. J

    DeLLorto UA16S to UA19S conversion

    Thought I would throw this out there for thought. I have aquired a UA19S carb along with (2) UA16S carbs. My plan is to convert the two 16's to 19's. I have had may conversations with DeLLorto folks in the UK. It appears that the carb body mold was the same. All internals were the same. Just...
  4. INJUNTOM

    Gilson/Wards big wheel conversion build

    Here's my 2nd Gilson, actually had a Wards badge on it that I've planned to go with 8" or larger wheels for riding by the river. On this one I'm going with some unknown 10" spoke wheels with knobby tires (let me know if you know what they are) If everything works out like it should, I'm going...
  5. markus

    PMR doodle bug engine conversion plate new

    New PMR conversion plate and hardware for the doodle bug 6.5 swap. It is new, it was only ever loosley mounted between frame and new engine to keep the parts together. $35 shipped, save yourself 10+ clams to put towards a sweet spray bomb paint job :laugh:
  6. Clayon

    OHV Conversion For 5hp Briggs FH

    Does anybody know where you can get the OHV conversion kits for the 5hp Briggs flatheads? I have been looking around but haven't found anywhere to buy one. Sent from my iPhone using Tapatalk
  7. NINETOE

    E scooter conversion ?

    Anyone got pics of there electric scooter conversions ? Any hints on gearing ?Just picked one up fo free .
  8. H

    tracked snowmobile motorcycle conversion

    Someone here was talking about these before. This one's in ID. 1973 SNO JOB TRACKED SLED SNOWMOBILE MOTORCYCLE CONVERSION VINTAGE NOS
  9. A

    Mini Harley weed whacker to predator conversion

    Wanted a tinkering/learning project so I decided to give my mini Harley a little oomph! Wow she was a tight fit! Just did a test drive today and when you're on it it rattles the eyeballs! First post here! Great site guys!
  10. toomanytoys

    atc 3 to 2 wheel conversion

    I am looking at a nice Honda 350x 3 wheeler. I want to convert it to a 2 wheeler. I know someone on here did it. But I can't find it. I know in the late 90s there was a kit to do it. But now I figure ill have to do it myself.
  11. 1

    comet 30 conversion to 20 series?

    Okay, I mounted a comet torque-A-verter on my Drivex packmule, keeping both jackshafts, and don't like it. I'm wondering if I can just replace the 30-series fixed plate with a 20-series, instead of waiting to sell the torq-a-verter and then buying a 20-series drive clutch.
  12. R

    Baja conversion

    Looking for a conversion kit to put 6.5hp engine on my Baja mini bike. Saw an old post on here but won't let me PM the person since I'm new. Anyone know where to get one? Thanks,Dan
  13. gowdor

    razor gokart gas conversion

    we got this go kart from some friends that were cleaning out there garage so it sat for about a year. We thought lets make a tiny dune buggy for my younger brothers i will post pictures in a little bit.:smile:
  14. bullhead

    Head light to batt. LED conversion

    I'v been asked to show this. So here what i'm doing. LED lights are very rugged. And LED headlight can be very high in price. Also getting light on a mini bike can be a hassle. So.......I am taking a $5 LED flash light and a Baja head light and making a battery operated head light...
  15. Rapidrob

    HS50 conversion

    I picked up a very good condition Tecumseh HS50-6727OK snow blower engine today. Snow blower's don't sell well here in Albuquerque for some reason. The fellow wanted 80 bucks for it and offered it to me for 65. It runs on the first pull and does not seem to have many hours on it(?) I talked...
  16. J

    Doodlebug/Rivet bike conversion

    So I have been reading on here that the weight limit of 150 lbs (Which I exceed, not by alot, but I do) is more for the motor, and if you up the motor to a 6.5 HP you will be fine. I want to do that on either a Doodlebug or a Rivet, whichever is better/cheaper. Which motor should I get for it. I...
  17. Scottessey

    HS40 slanted intake conversion to straight?

    Hey Fellas, I have an early 70's HS40 with a slanted intake that I'd like to use on a level engine plate bike. I had the idea of switching out the intake for a straight one. Will that work?
  18. TEXAN Connection

    Honda CT 70 conversion

    Picking up a CT70 with a bad motor tomorrow and want to build it Faster. Whats the biggest available bolt on motor for it? Im sure theres some links here to others that have done it. Kinda want to go automatic if I can but will settle for a clutch if its all i can find.
  19. S

    6.5 Conversion

    Im converting to the 6.5 how long does it take on average???
  20. jesse8931

    3 Wheeler conversion

    Go Kart for.. PS3 , TV , Tools or? This is a solid home built go kart. It has a 5hp Brigs motor , Runs very strong and can carry a adult very fast. Can be tuned down. This was ridden alot till the throttle cable broke and it has just been sitting around now. We have no use for it and with...
Top