engine

  1. 63IHSCOUT

    B&S 127CC 4-Stroke Screeching Noise

    My dad and I recently dug our mini bike out of the shed and cleaned it up, it is a Sears Drover that we bought already modified. The engine that was on it was a Briggs and Stratton 3HP engine(I didn't see the CCs but probably 127) it was shot, couldn't get it to run se we replaced the engine...
  2. G

    mikuni on 7 hp engine

    hi i wonder what to do with the guvenor arm? if i want to pit the mikuni 22 mm i saw some videos of how people put the arm to the front and tension the arm so its againt the internal guvenor inside? i dont want to remove the guvenor because i want the motor intact. i post som photos here for...
  3. L.skynrd

    I need a 6.5hp engine under $100 ( hamilton Ontario)

    Hello. I just blew my honda clone for my Baja warrior. I need an engine that will fit my bike. I need something to get me through the summer until I can go over the border and buy a predator. Doesnt have to be fancy, it just needs to run.
  4. Dans1970Z20

    NOS New Briggs Raptor 3 in Briggs Motor Sports Tote 135230

    Finally got around to digging out my Raptor 3 engine crate, taking pictures and listing it on eBay. http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&toolid=10001&campid=5335845805&icep_item=254988279427 Any questions let me know. Have decided I will never get to my Bonanza project...
  5. L.skynrd

    Honda 6.5hp Clone stalls out

    Hello guys. I recently bought a baja warrior of marketplace, and I am trying to get the engine running a bit better. The problem I am having, is that is stalls out at low rpms, so I constantly need to rev it in order to keep it going. It stalls mostly when I apply the brakes and come to a...
  6. S

    Coleman CT200u ex Pull start

    I recently purchased a ct200u ex used and modified it a little bit- stage 1 kit, new spark plug, new gas and oil, lubed up some parts, 18lb valve springs, new carb and carb jet. Athough recently i have not been able to start it up- the pull start will allow itself to be pulled a slight bit but...
  7. O

    Briggs & Stratton 5 HP

    No Longer Available.
  8. 20200521_161052.jpg

    20200521_161052.jpg

    Engine cover before
  9. S

    How much should I pay for a used 5hp briggs and stratton.

    There's a listing on craigslist listing for a 5hp briggs and stratton and it looks decent the guy said $60 and its mine it starts on starter fluid he said but then dies so its probably a carb issue. Is this a good price and will it be a cheap fix?
  10. 20200507_181220.jpg

    20200507_181220.jpg

    Engine mounting plate done
  11. 20200506_174944.jpg

    20200506_174944.jpg

    Aluminium engine plate fabrication.
  12. 20200506_174937.jpg

    20200506_174937.jpg

    Aluminium engine plate fabrication.
  13. 20200506_162140.jpg

    20200506_162140.jpg

    Aluminium engine plate fabrication.
  14. 20200504_161650.jpg

    20200504_161650.jpg

    Aluminium engine plate fabrication.
  15. A

    Monster moto 80cc won’t continue running

    Hey all! Ive got a monster moto 80cc and whenever I pull start it, the engine won’t stay running. I’ve cleaned out the carburetor and I cleaned out the air filter, replaced gas, and replaced oil, yet I still see the same results. I can’t attach a video of the issue. Any help is appreciated!
  16. 20190718_194903.jpg

    20190718_194903.jpg

    Engine assembly
  17. Randalbiker

    Pit Bike transmission Upgrade HELP!!

    I got a pit bike engine thats olny one speed and i was hoping to get a kit to make it 4, 5 maby even 6 speed. The engine is a 2007 139fmb 110cc. If anyone know where i can find an upgrade kit please let me know. Thanks.
  18. MTD ENGINE CLUTCH COVER BRACKET 5

    MTD ENGINE CLUTCH COVER BRACKET 5

  19. MTD ENGINE CLUTCH COVER BRACKET 4

    MTD ENGINE CLUTCH COVER BRACKET 4

  20. MTD ENGINE CLUTCH COVER BRACKET 3

    MTD ENGINE CLUTCH COVER BRACKET 3

Top