fast

I built this for a friend of mine . He payed me 2500.00 came to pick it up and test rode it and said sell it .It has a 150cc crate engine in it .everythink is new but the frame. He will take 2000.00 for it . Can e-mail more pictures just e-mail me...

Pending. Thanks.

What is your fast food weakness? For the couple years I've worked at keeping my weight down to a decent level. I used to push 250 all the time, now I stay around 195 to 205 depending on the time of the year. My problem is I LOVE FAST FOOD. Not even decent fast food. Nasty greasy fast...

Having issues with a Tecumseh OHH65. The original carb wasn't doing the trick (non-adjustable), it wouldn't run at idle. I cleaned it out and nothing changed, so I put an adjustable carb off of an H50 on it. Now it runs, but only with the choke on, and it idles fast...I'd say around 2000rpm...

I just got my arc billet rod, flat top piston, and fly wheel. I assembled the rod and piston and tried to install it. The rod hits the cylinder/ block. I thought I put the rod on wrong so I turned the rod around on the pistonput it back in now the oil slinger hits the cam what am I doing wrong?

Anyone else notice the sleazy additional warranty information that HF put in the box of the new Predators? They are now saying that the 2 year warranty indicated in the manual is incorrect and the warranty is now only 90 days. This is nothing more than a blatant attempt to sell extended...

I think this is the right section for this... I was wondering how fast a baja heat minibike would handle going, not with stock motor or gearing... I dont intend on going any crazy 80mph, but I would like to have it going faster. Ive been looking for a smaller bike motor with the gears, so...

Got the GPS unit out and went for a ride. It does 38 pretty easy but I had to tuck down low to get 40 out of it. I was blown away by how fast it went. I thought 30 was as fast as it felt. Scary part is my brake cable broke on me yesterday.

Cheeftah BC1000 frame, custom engine plate, and everything else. Restored bike, adjustable forks, Lots of new parts. Fresh 6.5 engine, premium exhaust, port matched with expansion chamber. Gas tank is not repainted, nor is the exh. expansion chamber. Has new sprocket, chain and tire...

Obama stimulus funded 'guns-to-drug-lords' plan for those of you that haven't heard about it. I think that obama was trying to create an excuse to reinstate the assault weapon ban.

Hello everybody this is my mini chopper that I am fixing up. Bought it from a guy not far from where I live for $35. I took seat and gas tank off to find the neck was cut out. Took accesories off that was not needed. Fixed and reinstalled the front hydraulic brake. Installed a headlight. My Dad...

I know this isn't a mini bike but I thought I just had to share with you guys. Look at his wording 60 MPH SUPPER MINI BIKE LOOK>>>>>>>>>>>>> :no:

I have a Kodak playsport and a flip action mount, both videos are in 720p and 60fps. first one is mounted to my helmet, and the second is mounted right in front of the seat. What one is better?:shrug: I want to know so that I am not posting bad footage. Here in on helmet: YouTube - 6.5 HP Mini...

Damn that's fast! And it comes with a free mini bike! http://stlouis.craigslist.org/mcy/2205564514.html

what is a good wheel and tire to use on the doodlebug frame for high speed and racing purposes. i like the type of wheels MDB has but i would like to see others also. thanks

I have a db with a Honda GX 160 5.5hp engine. I am running a 12 tooth clutch and a 60 tooth rear sprocket. My top speed with the govenor on is 30 MPH. Does that seem fast or slow? How fast is yours? Do I need to change my gearing? My tires are 4.1/3.50-5. Thanks. Please reply

I got these off Craigslist yesterday and it was a two for one price deal . The only stickers or identification is a four inch round Fast Karts Decal on the front forks of the green trike, it has a newer HM80 steel sleeve engine and I am thinking Manco on the Red [faded pink now] three wheeler...

im just wondering about how fast i will go on my mini. i have a 3.5 hp engine on it with a 12-60 tooth ratio. i weigh 105 pounds and i have the cat 250x frame :scooter:

FAST Go Kart This Go Cart has a brand new engine only started for the break in period. Its not a typical stock motor neither. The engine has A Billet aluminum Flywheel to provide safety when at high RPMs A billet aluminum rod to let you crank out about 9000rpm A 265 lift cam gives it...

I picked this Baja up Monday morning not running for $100 I cleaned the carb and had to rewind the spring in the recoil. Sold it Monday evening for $200. Not bad for an hours worth of work.:hammer::hammer::hammer: