flat

Used, recoil in good condition, housing around recoil needs straightening, nothing major. $15.00. From 5 hp B+S flat head horizontal motor, series 13xxx. See my other ads for engines and new mini parts. Drop me a pm if interested. Will post pics soon.

Just missed this one. Any ideas on what it is?

which one do you like better guys, Briggs or Tecumseh ? Back in the day a Briggs was more durable and reliable but a good running Tecumseh could easily out perform and out run a Briggs. We are talking factory stock bikes here.

They both say 2 hp on them ,, the silver one is suppose to run ,, I really dont know as I have never tried ,, Looking to get 30.00 for the pair or 60.00 shipped to you always open to trades or whatever you might have in mind ,, PM me with offers or trades ,,

Looking for the round metal air filter cover held on with two machine screws on back of carb,model h35 motor,thanks :smile:

I have had this for a while, dug into to it today and could really care less.. I will pull s few small pieces off to keep, then scrap the rest.. Nearly no compresion.. stuck valve? :shrug: VERY short threaded crank, STILL has iron water pump impeller blade on it.. :doah: NO lighting coil, no...

can a flat top piston be put in upside down , if so will it cause any harm ?

Long story short, my friend and I both have the same type of minibike, baja warriors with gx200 clones. We both have billet rods, AGK single stage headers, 6* spark advance and 18# springs. I've got a .265 lift modified cam in mine and my friend has a flat top piston on his. I have the TAV30...

Will someone please take a look at the pic of my new Honda flat top piston and tell me if it is supposed to be installed in the block with the dot on top facing in the direction of the push rods?

I have a 8hp briggs with the governer removed,I am trying to come up with a good way to connect the throttle directly to the carb.Have any of you found a easy way to do it.I have a design for a part to connect the cable ,but before I put the time into building it I thought that there might be a...

i got the engine back and is up f/s.....150 shipped.. orlando florida..150 shipped runs good new carb fast 5hp

well my uncle have a 5hp briggs and wen he turn on the motor turn on good wen he take it off shocke it die......... why???he need to set up the return springs beter?? or is geting to mush air???

i used to race gokarts from ages 10-16. now im 22 and looking for a motor too put in a mini bike i just bought. i bought a Frijole replica that is longer and taller made to fit a 5ho briggs. now i just need one lol. so if anyone on here has a 5hp briggs let me know. pm me if you can im not a...

do they make any go fast parts for my little 3.5?

looking to buy the flat style Rupp tank Thanks Steve

i got a old 3 hp briggs flat head from a friend and i wanted to know if there is a governor on these... and how to adjust the screw on the side of the carb it is the kind were the carb is on top of the gas tank with the tubes going into the gas tank i got it to run but i wont idle please...

would the bolt pattern on a HP flat head Briggs be the same as a 5 hp. i have a mini with a HP Briggs. my question is what is the biggest motor i can put in the stock location.

Does anyone know is it clockwise or counter cw to lean out a carb on a 5 hp briggs flat head?? I know bout turning it out 1.5 to start but not sure which way yo go for lean?? Thanx john

I have a 6.5 that I am going to build, I dropped the head off to get milled .065... My questions are, Will a flat top piston with the head milled be too much compression?? next question: which engine has teh flat top piston stock?? gxv160 mower engine or the gx160 horiz shaft eng?? I'll be...

Can anyone tell me what number spring to use on my 5hp with the govenor removed?? I also need to find them along with copper head gasket and side cover gasket,the usual suspects,AGK,and APS did not have the springs but may have the gaskets?? 5hp Briggs I/C stipped down and getting a (valve...