heads

I have two new 14cc JT-07 clone heads that have been ported and polished. One has 28.5mm intake and 25mm exhaust valves, the other has 27mm intake and 25mm exhaust valves. Ports have a sand blasted finish, combustion chamber unshrouded and polished, & cut multi angle valve seats. Comes with all...

I have a set of 1969 Cat 400x wheels with original tires, sprocket, stars and axles. Have been repainted but not rust. Tires are in great shape, no cracks and lots of tread. Front wheel: 60 plus shipping Rear Wheel: 85 plus shipping I'll do $145 shipped on the pair. The kickstand...

I have ( 2 ) new predator model 363 hemi take off heads complete with valves , springs, retainers and rockers. $35 each pm email or cell # for pics

Just passing this along to others as a warning... We ordered a bike from them 2 1/2 weeks ago after being ASSURED by the owner of the company "Jay" that it was POSITIVELY in stock (You can see where this is going). They tell you how they pride themselves in customer service and that you will...

Three billet cylinder heads, two of which are finless alcohol engine design. The third I believe is for a Blockzilla engine as it definitely does not fit a standard 5-horse Briggs, Raptor or otherwise. $35 each shipped. 23 tooth Quarter Midget sprocket, $20 shipped.

two mini bike minibike minibikes for sale Looks like it could be a good deal. Roger

I need 2 Briggs 3 hp cyl heads (080202) the 2 1/2hp would also work (060202) complete with head bolts would be great ....pay pal ready ....Thanks

These are from 2 Baddog engines I bought on ebay for a dual engine project. I decided to cancel the project and part out the engines. All I have left are 2 crankcase covers with bolts, 2 cylinder heads with bolts, & an electric start flywheel shroud. I am asking $35 per item, but willing...

This is near the Pittsburgh area. I was thinking there was a lot of interest in these, So I figured some of you guys might appreciate the heads up hornet mini bike

Anybody ever heard of knurling the valve guides. Back in the days of building small block chevys we use to send our heads to machine shop and they would knurl the valve guides for better oil control and i know it renews worn guides abit. cheap way to renew guide without having to replace them...

i have a murry i am playing around with it has a tecumseh 3.5 ( needs carburetor) but i do have several clones and flat heads. any suggestion on what would be a good options for playing around . thanks mike

I'am wanting to know if you can use the 20 percent coupons on the predators that are on sale for 119.99 . The coupons say not to be used for items already on sale . I'am wanting two predator 69730's for the RTC-6 heads that come on them .

Gonna be doing some porting on my 18cc Predator head soon. New to porting, never done it before but I have a general understanding of what the process involves and the tools needed. It is to my knowledge that it is hard to mess up these heads (unless you have Parkinsons or something) with...

Gonna be doing some porting on my 18cc Predator head soon. New to porting, never done it before but I have a general understanding of what the process involves and the tools needed. It is to my knowledge that it is hard to mess up these heads (unless you have Parkinsons or something) with...

I have the ability to flow heads and carbs now, with actual CFM numbers. What are some of the highest numbers you guys have seen with modified heads? I am flowing at 28inches, by the way. I found some stock flow numbers on here the other day, and my stock numbers were right with them.

I am starting a few projects this winter and I can't do the work myself, looking for someone that can mill and port small engine heads pretty cheap.

I am after either clone or predator hemi heads to suit big blocks, so if anyone could tell me who can get me a few that would be appreciated. Cheers

Aight bros After poppin off the valve cover on my hemi predator and seeing the rocker arms on it I was kind of sad that i couldn't find that style in 1.3:1. I wondered if the old style predator head would fit my engine, or even a smaller gx series head, but I read somewhere that the old style...

So today went down to my friend Craig's to use his lathe . He was just finishing putting together a limited mod flat head . Had got the open done before i got there . The limited had a precision cam with like 458 lift and 306 duration , big ass cam . The open has 125 over piston and a lunati...

Hey All.....Just wanted to throw a heads up that I have taken over the ARCO owners group. And of course a big thank you to blkscorpion80 for letting me do so. I will do my best to dig up and compile as much info, etc on these great bikes.:thumbsup::thumbsup: Any obscure brochure pics, etc...