kill

Just like the title says, looking for the chrome push button kill switch for 1'' bars. Thanks in advance OND

Does anybody know if a remote kill switch ( to shutoff an engine for a kids safety) is available and if so who makes one and where can I buy one? I thought that I saw one, but I can't find the web site or company anywhere! Thanks!! rogersyme

Hello! This is the outcasts from West Branch Middle School, and we are looking for a kill switch for the Bonanza minibike. We were also wondering if the Bonanza minibike had a kill switch and if so where would we find one.

I would like to use a handle bar mounted kill switch but this motor doesn't have a tab on the coil to hook one up. It has the stop switch that hits the top of the spark plug. The kid that rides this one really wants a kill switch on the handle bar. Is this possible? Thanks for any help. Jim

Here's my second question for today. How would I wire a kill switch to a Tecumseh non-points ignition? I'd like to get the toggle switch that is on my frame working. I found plenty of info for the old points ignition setup but nothing for the newer ignitions. Thanks again. -Ray

So.......I built a baja/predator combo with all the same junk on it everyone has(i.e. stage 1 kit, bsp3 cam, 18cc head , etc...) and i put a tav-2 torque converter on it. Love the low-end it gives me. However, I keep having this problem.... It keeps launching the driver unit up through the side...

Which one of these wires do I come off of/cut/splice to get a kill switch up on the handle bars? Thank you for any help.

First off, i'm not sure if this is in the right section (mods please move if so) but I ordered a keyed ignition with an on and off to mount on the blower housing then run the cable strait down and out the bottom and along the outside of the bottom of the engine to the old kill switch area. I...

I'm looking for a stock raptor kill switch like pictured.

Haven't had an engine without a kill switch harness until now. Trying to avoid yet another task of removing the flywheel so looking to verify that this is correct connection point for the grounding switch.

https://www.youtube.com/watch?v=56lFhpByO2s&feature=youtu.be

So I was looking for a kill switch for my predator 212. And I was wondering if this would work. On Off Switch Kill Switch for Doodlebug Mini Bike Blitz Racer Baja Dirt Bug | eBay Would have the same ground and wire as the predator? If anyone knows of anything cheaper and if this will even...

Can any Hodaka Ace 100 owners send me a pic showing your kill switch hook up? I want to be able to stop this beast before I fire it for the first time! Thanks

Box plastic is busted on the front. Button is Wizard brand from Western Auto supply. New, never used. $5 plus shipping OBO

Can I ditch the really or do I have to keep it? I removed oil sensor and plunged hole. I searched and searched on here but with no result. All help is appreciated pictures help a ton too..

Hi all, I'm new to owning 4hps, but have read that they have a smaller stroke, and higher compression than 5hps. I have brought this 4hp for 40 bucks NZD ($28 USD). I was wondering if these were rare? It looks to be a silver motor which I read were good. I'll have model numbers when I...

Good Morning All, I just picked this up last night. I have no idea what it is? It has a 5hp Tecumseh engine. It was missing a kill switch, had fuel in it that looked green, and needed an oil change. After i cleaned the tank and the carb, cleaned the plug, and wired up a crude kill switch, it...

Mini Bike - Arctic Cat "The Cat" 400TS

I have been working on it quite a bit this winter. So today was the day I finally got to put some gas in it.it has a predator 6.5 hp 212 cc Engine with a billet aluminum connecting rod,flywheel and new spring. Also put a stage one kit on it .i'm a pretty big guy so I thought all this was...

Can anyone help me?...looking for a wiring diagram for a 1970 Benelli Buzzer or if there is a certain starting procedure, kill switch, etc.? Thx JB:mad2: