Hello guys. I have a 6.5hp Honda clone from a "Baja Warrior" bike. The oil is full of gasoline, causing it to misfire, and not idle properly. I have checked the float bowl in the carburetor to make sure that the needle for the valve is seated properly. Nothing seems to be wrong with the Floater...
Hey everyone, I was working on my other 5hp Briggs tonight, I've had this motor for a while and last time I messed with it the governor pivot arm was leaking from the motor side. So I messed around with it again and got it fired back up. Why would it be leaking oil where the pivot arm is...
Hello Guys,
I have one of these Benelli Volcano 180's and the kickstart shaft seal is leaking. Does anyone know if I need to split the cases to replace this seal or can it be accessed through the opposite side cover?
Any help is greatly appreciated.
Thank you,
Mailman
ps. Does it have a...
its not quite "mini" but I don't know where else to post - its a good size Tecumseh with series 20TAV on a vintage Cushman - I let it set too long - petcock was clogged - after getting flow, this plastic rectangular box piece seems to be leaking gas at a bad rate - what is this part called? what...
My daughters db30 started leaking fuel this weekend around the base where the carb and head meet. I took it of and it appears to be coming out of a tiny hole on the carb. Any ideas as why? Thanks in advance
Anyone have any problems with the tank leaking at the seam? Just picked up the engine on Sat, new in a clean box. Was "throwing " together a knock around bike for my buddy to use as a pit bike at the track. Fired it up tonight, started on first pull, runs great. Smelling gas and see it seeping...
I've been working on my ARCO. It has the original H40 that hasn't ran in who knows how long.
I took the carburetor to my uncle's house with the $8.00 kit from OldMiniBikes. He took it apart, cleaned it up and popped it back together (actually, I did it under instruction so I could learn how). It's as...
Hello Everyone,
My Boonie Bikes' Techumseh ohh50 is leaking oil from bottom of crankcase cover on side w PTO.
I changed the oil, and inadvertantly overfilled it...althought the 'dipstick' did not indicate it ? :shrug: I ran the motor, up the street and back, then realized i'd over added...
I have a new Black Max 3000 Watt generator with a Honda GC 190 engine. Everytime i till it on its wheels to move it leaks gas from the carburetor.I have been given the the run around by both Black Max and Honda, I can take it back to Sam's Club and exchange it , but have the feeling the new one...
well im guessing it is because of the fact that theres no gasket between the carb and tank. its also not getting in to the carb so if im right.. does any one have a gasket
Guys is there a shut off valve or something for these old streakers? Mine is dripping gas sometimes. I have no real reason why but Im waiting for my air cleaner to arrive and I dont want to put the new air cleaner on and have it leaking into my filter. Something easy or am I in need of some kind...
I'm having some issues with my carb. While its running it leaks out of where the air filter adapter is. I can see it coming from inside the carb. Is this normal?
Hi there I have what I believe a 1971 Suzuki MT50 Trailhopper. It is orange in color. I had a leaking fuel petcock valve. So after a long while of searching, I finally found one on e-bay. It looked like it was in ok shape. The rubber inside the petcock was in great shape. I was bummed out that...
I have one of the yellow clones, not sure but thinking Champion? Anyways it has a fuel level indicator on top of the tank and it's been leaking and getting on the little girl's clothes when she rides with me.
Any body cure this or should I put on one of my engines without the indicator and...
I have a tecumseh power sport H35 engine on my manco thunderbird minibike that i was trying to drain the carb float bowl to get all the left over old gas out. I assemble it back and tighten the float bowl bolt back on to the carb, I filled up it up with new gas and i notice that it was leaking...
Hey guys! I'm here from PocketBikePlanet! I'm new to this site here but I've been working on a x-18 bike i bought off of craigslist. I've gotten pretty far but the folks on PocketBikePlanet must have either lost their passion of these motors or just tired of asking questions. I've done some...
I have a 1969 Rupp Rodster with a H50 and a UB22a Dellorto carb. When the bike is not running it has gas dripping out of the velocity stack. What can I do to fix this problem?
Engine is on my pressure washer and not mini-bike, but an engine problem is an engine problem and the H60's power many mini-bikes so here goes.
Techuseh H60 6HP 75557U
Leaking oil from the side case up on the top, that appears to be coming from the governor output shaft. I picked up a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.