linkage

how do i correctly put the linkage and springs on from the carburetor to the governor?:doah:

I have recently aquired a Techumseh 3.5hp engine. But I am confused on how the throttle linkage should look where the cable attaches. I have searched on here and some threads show the linkage with a spring alone going to the governer, whilst some have a rod aswell, which I don't have but makes...

how can i hook up from a standard linkage to a mini bike throttle grip?

how do you guys hook up you throttle on you 5hp briggs and stratton i want to put my 5 horse on my mini but cant figure out how to hook the throttle up and can i use a brake lever instead of a twist grip

I cant for the life of me remember where I bought this. :doah: I have bought some from EC, but they have "EC" scribed on theirs I believe. Maybe not all of them do? I really like this one due to the fact that it is a bare part and very thick cut. Anyone have a line on these? Also the half...

Looking for suggestions for connecting a throttle cable to the HF 2.5 hp motor (DB30). The linkage setup on the new motor is totally different from the original motor. Did a web search, found a lot about the 6.5 clone, but not much on the 2.5 hp. Anyone have a good solution? Thanks.

Hello all. I am working on a Bronco mini bike. I was recently given two 5hp Briggs engines. The one starts and is currently on the bike has an updraft carb. I did the best I could with linkage and I am wondering if anyone else has done the linkage to this type carb? Currently the motor starts...

I bought a HF clone off craigslist that someone had a DIY linkage setup on. I have all of the original parts to return it to stock but I have no pictures or anything on how this works. From what I've found here by searching is that there is a linkage and spring coming from under the tank that...

I have a Honda GX120 and a carb linkage kit from someone in California. Can someone post some pics of typical throttle/governor/carb springs/linkages setup? I still want the governor connected, I think. Thanks Frank

i need pieces for my Tecumseh h35 throttle linkage.. all i have right now is the governor arm, and the arm that connects to the cable. i need springs and whatever those metal linkage pieces are called. if you have an pieces it would be highly appreciated ;) -GC-

Lil' Indian Briggs 80212 Linkage

Can you guys show some pics of your throttle linkage on your Briggs Flathead? Not pics of the stock linkage, pics of the linkage with the little kit that you can purchase. I think I have mine assembled incorrectly.:confused:

Please delete this thread.

The stock throttle lever on my HF clone is super stiff/hard to adjust. I'm wondering how you guys go about getting it to work, fluidly, with a throttle cable.

I've seen plenty of kits for the Raptors that come off the top of the head...I'm looking for ways to keep the original air cleaner. Any ideas?....I'm runnin' out of zip-ties:laugh: Thanks!

I'm a newb and lost the part that connects the govenor control arm to the throttle shaft. The bar that pushes the throttle when you pull on the throttle. I included a picture I found online here, but can't get it to paste on here so I included the link to the thread. Thanks in advance!

Hey guy's I am looking for a little direction. I bought this mini bike and I think some of the carb linkage is MIA. I followed a couple of you guy's advise and it starts with a little messing around with the choke. I cleaned out the carb and tank. I cleaned out the little screen on the...

Well thanks to the help of "mybiz" He has identified my sons mini bike it is a Fox Sprite.:thumbsup: I have a question about the carb linkage. I do not think it is all there. There are two types called out, an air vane governor, and a mechanical governor. On the B&S parts list I cannot...

I have a taco 22 built in 67 I bought from the original owner the 3hp briggs was apart in a box. I reassembled the motor and it started right up but it was missing the throttle linkage. I had the local mower shop order the parts but they didnt get everything Ive been back twice but the motor is...