needed.

I have a set with bad sidewall cracks. Hoping to get some original nice ones safe enough to ride on. 4.10/3.50-5

Looking for some 16X 8-7 tires 110-140Cc chinese pit bike engine Chinese pit bike parts.. electrical.. exhaust.. Powder coater in michigan?

Found a decent bike, missing this fender and a long chain guard. I could also use an original Cat 400 seat. Thank you for reading.

Hello Fellow OldMiniBikes Members & Minibike enthusiast's' I have recently asked another member if their acquaintances can straighten a slightly warped rear rim, & a sprocket hub,which will require much effort or skills to properly repair to true straight & correct angle. Never the less, I got no...

Does anyone have pics of the Super Tryke with the single seat. I need some close ups of the tabs that hold the foot pegs. showing any angle they may be mounted in. Also does the hard plastic seat just sit flus on the frame mounts and the 2 angled pieces that go under it. I think the angled...

I know Sportstyl minis are kind of a rarity around here but a couple months back there was a manual on eBay that I missed out on. I wondered if somebody here might have picked it up and could help with a part number or image from it? I'm trying to complete my childhood bike but can't find solid...

I am looking for chrome rupp enduro handle bars. My u bolts broke on mine. Figure I Would ask on here before I cut the u bolt off and weld a new one on.

This is my first post. I just picked up a mini bike exactly like this one. I am looking for the recoil starter for this engine. Engine is an. OH195EA Part number for the recoil is 590788 Thanks, Dan

Anyone have any thoughts on these or some nice ones they want to sell me for my Alsport TS. I need to get ready for Windber. Carlisle Knobby 22x11.00 -8 2PR - tires-easy.com

Anyone got a cap that will work on this?

I could sure use some help regarding the OldMiniBikes website fellas. When I'm posting a new thread and wish to add pictures; I click on advanced and then click on manage attachments. At the top of that window there is a red and green bar type indicator that says: Sum of all attachments owned by...

I need a throttle wheel and cable mount for a 2 piece Flo-Jet carb. The wheel attaches to the end of the throttle shaft and the cable mount holds the end of the cable to the carb.Thanks!

My Golden Pinto needs a new brake shoe/pad. I would like to replace it with the same aluminum style, not the stamped steel kind. Any help?

This is my first post and after reading this forum for a few weeks I know some of you guys will be able to critique (make adjustments) to my list if necessary. The bike is a Baja mini MB200 that I bought last month after watching a bunch of videos on youtube. And being true to my nature, the...

Well I 'm looking to capture some memories from childhood to pass onto my grand kids. So having sold my Powerdyne back in '70 to get my Honda 350. I'd like to get my Powerdyne back. Can you guy's give me some pointers on what to watch for when going to look at a bike? I'm going to look at one...

I'm freshening up my Briggs 5 hp :hammer: and I need info on all the usual specs, ring gaps,:grind: rod end cap torque, case half bolt torques ect. I can not seem to find any books on this engine with the info I need. Is there a web site or does any one have these #'s The Briggs is a 5 hp---...

I have a frame/forks from a Cat Duster. I want to make it into a cool little chopper mini-bike. After Googling various pictures, I think there was a couple different versions...one had a rear disc brake, and one had a scrub brake. My frame has the pedal for the scrub brake but still has the...

I need the brake lever for a Baja Heat. Or a link to a suitable replacement. But I would like original.Thanks Randy

Need a 12" front wheel and a 10" rear wheel for a MTD Minibike.

hey, OK so im building a barstool racer, and soon a mini bike once the stool is finished. i have a 5hp B&S I/C Flathead on it. bought it as new old stock from bad dog enterprises. while i have been building the the stool id fire the engine up run it test the tav2 make sure its running good and...