original

I'm trying to find a overrunning sprag clutch sprocket to rework my trail horse jack shaft back to a two speed. I have the original jack shaft clutch & the 24 tooth freewheel sprocket, but the sprocket is missing rollers & springs. If anyone has any ideas were I can find a replacement sprocket...

If you are wondering what your bike might look like in a different color, a good way to get feel for different shades is put a pic in your photo editor and slide the color bar in small increments and save. I did this on my phone and simply took screen shots. The middle is my MTD's original...

I'm using the original wheel sprocket and replacing the engine with a 3.5hp. what clutch should i put on it? 10T, 11T, or 12T. Thank you.

I am looking for a Comet (or any other) 5/8 bore drive clutch / torque converter. It seems that most are 3/4 or 1 inch bore. Mine goes to an older gokart, and I want to keep it original. Any leads would be helpful. I picked up a fairbanks morse on ebay, but I think that it was designed for a 5/8...

So today I was riding my trike on a field. While riding slowly back to the car it suddenly stopped. After inspecting the engine I saw a huge crack on the block. Anybody got any ideas on why this happened? Modifications I've done. Milled head 0.080. Ported and polished head. Flat top...

Bike is 90% original. New chain, front tube, chain guard and throttle assembly. I have the ARCO sticker for the guard. I did not put it on because I'm not sure about the paint match. Starts with starting fluid. I am sure it will need a carburetor kit. Throttle linkage and choke work smoothly...

Hi, Since last week I have this little Kawasaki KV75. But I can´t find out what modelltype or year it is. I saw on the internet something about KV75 A1 or 2 or .., But what type is this one? I also would like to know what year it is, so I can rebuild it in original style. Regards,

Up for Sale is a very unique Mini bike to find in this Condition; 100 percent original Survivor untouched 1969 Powell Challenger Serial Number; 4533-E All original untouched parts ; Tecumseh engine. Front and rear Chrome fenders Original Brake and throttle controls Aluminum/Steel wheels...

I'm just wondering if the ruppster came with any other motor then the jl230. I found one with a rupp 340 and the rear end looks original not hacked up looks like it was original setup. Does anyone know if rupp made the ruppster prototype or a upgraded ruppster with a 340?

I know I read it somewhere but searches are not coming up with it. I've got a crummy paint job that I think didn't need to be sprayed over the original color, even though I like the second color better. (why didn't they just wax the dam thing?) At least the previous owner masked off the...

OldMiniBikes is out and I'm looking for one. Heard a member has some hopefully they respond on here. I don't need an original one bc the bike is gonna be custom. Thanks

I have a year ? Bonanza BC 1000 trying to find the exact year.It has the original Kidney bean wheels and the footpegs are at the center of the frame. It has a 3HP Briggs on it serial # 80332 0474-01 7205013 Trying to figure out if this was or is the original engine on this bike MINI BIKE...

Hello, I am selling my genuine fake Powell clutch cover. This fiberglass replica is better than the original, as the original ones are nearly impossible to find, and it is possible that you found this one! Ya see? This is in good shape and should work well for most Powell restorations. I am...

I need a round chrome pmco taillight with licence plate illuminator used on 6" wheeled rupps, bonanzas and many other bikes. Ok if it needs re chromed and don't care what the lense looks like. I would like an original one from the period not one of the newer ones that look similar and are...

Any idea on what these wheels are original to? They look similar to Honda Trail 70's, but with two extra spokes.

Pair of original tri star wheels. 13x5x6 NANCO tires good tread. Should clean up real nice. Looking for $100 or best offer.

I have a 68 Broncco Tx-3 that I found in a barn in northern Iowa a couple of years ago. It has the Aspera engine (HT25) and is fairly complete, though it is missing the stock seat. It does have the original Pirelli tires and wheels. Frame is painted a green similar to what the bikes were painted...

Original Bonanza MX1310 that I picked up a while back from the original owner. This mini bike looks like it was never used much. I have done no clean up on it at all. Has 4 hp Tecumseh with lighting coil. Engine has good spark but will need to be gone through and tuned etc as it has been...

1970 as found original with light kit Sport King.. I would like to trade this bike for an El burro or trapper original 100% Tires hold air bike runs and drives as it should complete the only reason i'm looking into trading is i have 3 note this bike is only for trade not for sale!! \

Trying to find original fenders but I don't even know what to look for. Appreciate any assistance.