performance

Hi all, new to the forum. Been readin' on here a while now. This place is awesome! All kinds of great info, tips, & tricks, love it! Anyways, i'm looking for some good used b&s 5hp flattie parts. Anybody got any or know where to purchase some? I hope i'm not posting in the wrong place, if...

my friend just upgraded to the greyhound 6.5 hp enging just wondering if anyone has any suggestions about high performance parts and upgrades we checked agk and wasnt too sure about what we were looking at as far as what would really make a difference:hammer:

wow. I have never seen one of these before. Are they good motors for the price? Bad Dog Enterprises - Mini Bikes, Mini Choppers, Parts, Kits & Assemblies

can anyone direct me to the to sources for performance parts and mods for briggs vangaurd motors 23hp in particular

Introducing our new S1 and S2 push rod sets, available soon at www.raceseng.com ! We've been developing these push rods over the last few months and have come out of 4 phases of research and development with two new push rod products that will redefine the performance push rod for the Honda &...

just thought i'll share this just order mine today just by the looks of the oem one from the clone i knew i need a better one and arc claims :deal: it to be a great plug so why not...let me knon what you guys think AR3910X Racing Spark Plug

Two pipes for sale: Will fit 6.5hp honda gx200/clone motors Performance pipes for sale. New, never run. Message - Old Mini Bikes Photo Gallery $53 shipped http://i902.photobucket.com/albums/ac226/motormind69/0104111738a.jpg $45 shipped

Need to know were i could get some aftermarket parts for a vertical shaft briggs 9hp can i use parts from a horizontal shaft?

Okay, so Have a 100202 engine (4hp) bored out to take a 5hp standard piston I have a 5hp crank and an R2 rod ready to go in I recently bought a couple of cams for cheap and was wondering which one I should use, this is going on my RUPP Scrambler witht the stock TC-1 on it by the way Keep...

Ill make a proper intro thread later with pics when i have more time. :) I have a 5hp Briggs horizontal shaft, vertical cylinder flathead with a big bearing in the side case. Ill get the part # later to figure it out exactly. Performed beautifully bone stock more or less (straight piped for...

Engine spcs... -Briggs 5hp Flathead -94ss cam -ARC rod -gov removed -heavier valve springs -copper head gasket -The rest of the engine is stock includeig the carb... I can get the engine running but its hard to start, when its running it wont idle unless its at a higher rpm...but the...

Okay alittle intro here I had a Rupp Scrambler as a kid and now I want one again found the bike which is 90% complete Thats where I need the help I am going to be using a Briggs 5hp on it model number is 100202 Are there any performance parts out there for this thing? I am big into...

I know that plenty of people are interested in performance parts for old Tecumseh flatheads and I just recently emailed Dave Ables, or Batman, about the parts he carries. The list he gave me about the things I asked was as follows: HS50 Billet Rod..................................$85 .225...

So im looking to build up a perormance engine for my mini.....i currently own a HF clone with AGk's basic kit (pipe, air filer, jets, and 18lb springs) It no doubt an afforidable way to go...But im looking to go bigger....My question is should i put the money into the clone buying flywheel...

I have a two Old School High Performance Tecumseh H100 Flatheads that I need help getting running again. These engines are modded for high-compression with Tilotson Carburetors that are set up for alcohol. I got one to start briefly, but need help tuning the carb. The other needs the carb...

looking for input on this clone combination engine is for play kart!! new clone w/existing parts 22 mm carb open header billet fly wheel arc rod new wrist pin and c clips will the following mods make sense and work well 1.2 rockers w/laser cut giude plate 18# springs?? or do I...

TWO 5hp arc rods $25each 5hp ported and smoothed raptor carb with filter adapter , New diaphram and spring..AWESOME carb. $50 5hp 107ss cam $55 5hp New double valve springs $20 5hp Brand new stock .020 piston and rings $25 ported 206cc intek head $25 stock used newer style 5hp crank $20...

Ok so my Speedway has a 3.5 Tec w/jackshaft running 10t clutch to 10t to 14t to 60t on the rear, motor runs strong but wont take off well and seams to be straining is it just that the motor is to small for 10" wheels and my fat a$$ ? I know its not the carb because I used this carb on my other...

Just finished my Harley X90, and wondered if it is performing as it should. It goes upto 40mph, and slows down to 30mph on an incline. :scooter: Should I expect more?

Dose anyone know of a supplier that carries that nice header tube/canister exhaust pipe that fits on Tecumshe flat head engines, kinda of an "S" shape to it. Dose that muff/pipe have any performance gains to it or is it just for looks, It is going on my Sprocket with a 3.5 hp Tecumshe Power...