replica

Howdy all. I am Jim from Arizona. 60 year old guy with a few metal and wrench skills. As a pup I had a Tote Gote and remember going everywhere with it. I keep thinking I need a new version for general trail riding and maybe dragging a deer or elk back to camp. Some would say a quad would be an...

Does anyone on here make there own molds to replicate parts that are rubber? Or does anyone know a company in which you can send rubber parts to have them recreated?

These are similar to the famous Taylor exhaust pipe . They are pipes have no muffler . They have 1/2" bungs welded on to screw small muffles on . These are for the 3 to 3 1/2 hp Tecs . Can be made HS 40-50's and Briggs 5 hp's Price 45.00 plus shipping . They fit in a small if it fits it ships...

Here is the start of yet another idea blowing through my head. .. I want to build a Board Track Racer and I'm going to use this Briggs Flathead. Here is the start of some motor work. As I build, I will post what I've done, hope it turns out well Sent from my SAMSUNG-SGH-I317 using Tapatalk

Well after getting my other minibike running with the turbo, i've decided to make a new frame and change the style a little , since the old frame was made for a GX160 and i have a EFI Turbo GX390 in it, i can see it flexing so im going to make a new frame for it Below is how the old bike...

Im going to try to build one of these for my sons. Looks pretty cool. Build a .30 Cal Machine Gun: DIY - YouTube i'll let you know how I make out.

Well looking through my friends 1975 Ruttman catalog I thought it would be cool to bend up a couple of frames. So inthe process of tooling up for the job all the specs are there except tubing diameter. So anyone know the tubing diameter, or do you think 1" is too thick or heavy?

here's an early Christmas present for all the little gremmies out there! here's how to make hubs any size or width you get heavy duty roller bearings and get aluminum tube stock thick wall and get 1/8" alum plate for spoke, sprocket and brake flanges take it down to local machine shop and you...

this construction is going to be more like a 60's go kart than anything else just hard to do IRS with lawn mower engine could someone describe mounting points for Porsche/VW 914 2.0 engine with manual transmission?

Thought I would share a pic. of my first pass duplicating an Lil Indian Mini-Matic 2 speed mount. A member mailed me a year or so ago some dimensions to work from. I think the mounting plate is too thick. Don't really know, and my welds need to be a little cleaner on the next one. A goo start I...

Based on a '65' Taco 99 bolt together minibike with the West Bend 820 series engine. This mini was built with thicker tubing(.093") instead of the thinner wall tubing.This is the same thickness as the forks. Has the one sided adjustable jackshaft,Mercury clutch(OEM for the 820 models,engages at...

I've decided the junk 8hp briggs flathead I bought is in pretty bad shape and probably not worth trying to find a crank and rod for it. Cracks in both sides of the block, bent exhaust valve, ruined crank/rod, nicked up intake cam lobe... So I'm going to use it for my exposed crank project I've...

Gotta move on. This assembly was George Kaplans first REPLICA 55 that I bought years ago.I opened up the motor mount slots to fit the larger West Bend 820 engine,and opened up the larger crankshaft hole as well. It has the jackshaft and bearings,sprockets,rear REPLICA Taco 44 shocks,and the fork...

I want to build a Powell Challenger replica but I would like some measurements from a frame and I also need the width of the frame at the widest point.:smile: