slide

Looking for a 24mm flat slide with manifold.. mikuni, pwk, oko, etc thanks

Hello all, I'm brand spanking new here and I appreciate any help you all can offer me. I purchased what I believe is an genuine mikuni vm22-133 but I have some concerns about the jets. I bought a new pilot jet that went in with no problems. The main is a different story though. It seems...

Real never used brand spanking new carb. $75 shipped

I have a bigblock with ported head, big valves, header, billet rod and flywheel, cam, and a 34mm mikuni. It came with a 280 main and 50 pilot which is way big and running pig rich. I was wanting to know what jet size on gas some of y'all are using with this carb so I can get close without...

28mm Mikuni alky/methanol slide carb. Year old bought from nr racing $149. Selling Shipped $110 bucks pay 3% on PayPal.

Not sure who the maker is of this carb, only marking on it is a "C". Measures 19mm. In decent condition. I have not had this on anything. Includes pleated filter. Protective rubber cable boot is torn at the top. Asking $30 plus shipping. PayPal preferred, include the fees or send as a friend.

Vintage Domino Slide Type Throttle...somebody cut off the built in brake lever that's the way I bought it. I was going to finish filing it smooth and then polish it..make a "poor man's Dellorto" throttle out of it. Slider mechanism works well. Cable exits parallel to handlebar...

A friend of mine has a small HF combo mill lathe machine. He uses it at his work for odd jobs. The other day he called asking for help, the brass bush that engages onto the feed screw of his machine had stripped from years of use. " I know years of use :laugh: , but its true 5 years old" All the...

I purchased a Tecumseh HSK850 5 hp 2 cycle engine from a snowblower a while back. Has anyone used one of these? I plan to install a 22mm slide carb-and a custom exhaust. Thanks for any info.

Hello-it's been a while since I last posted. I have a 5 hp Briggs flattie that was made in the 90's. I am going to put a 22mm slide type carb on it. Can I still use the stock muffler, or should I put on a header? Using the stock muffler would make life easier. The muffler is the box-type with...

Can you use a 22mm mikuni intake cut in half for a 24mm flat slide mikuni carb

Went to go start my MTD. Thing starts on a couple pulls everytime. But today.:shrug: So, I take a peek at the carb, and what????? No choke. Gone like gone, gone. Just a friggin hole sucking air.:censure::censure: So can you replace them or is the carb time for the truck? When I freshened...

custom throttle for 7/8 bars its a slide throttle assy so it works smooth and doesn't have all the slop. the other cool thing is they are thin, and the cable exits parallel to the handlebars for a cleaner setup. these have just been cleaned, blasted, polished, serviced, yes they are vintage...

Ive been messing with a baja brand 49cc dirt bike, which uses a PZ20 carb. This little 49cc is fast, and has me wondering about the carb size on my sons OHH60 he's using to power his OldMiniBikes Build-Off trike. The OHH60 is probably over 200cc's, is the stock carb what is limiting its power? (his...

these type carbs are the most tunable and efficient carbs. no flat spots since the slide lifts as the engine wants it to not how your throttle hand tells it to. the kehin cv carb that harley started using works graat with simple modification. i was 30+ years in the motorcycle business and i...

Okay, here is the first of many questions I will be asking :smile: I have a 1976 Indian M5A I am starting to restore. Although I'm a ways off from painting, I want to get all the info I need so I'm not stuck waiting when the time comes. I picked out my powdercoat color for the tank and...

Want to buy a 24mm mikuni flat slide

Hey all, I am looking for a 28 or 30 mm mikuni round slide for a big block tecumseh project I am putting together. Thanks guys

i need either an ibea 29mm slide or a tilly hl380. whatcha got? looking to buy a used one and have korndog go through it. if not, then i guess im going to have to buy new.

HL-357B, blueprinted by E.C., no choke, custom fuel cap by Atsownz. I'm asking $70 [open to offers], the fuel cap cost me $24+$6 shipping alone. Carb is on the right. Carb is on the left. Bore Carb is on the right Briggs 5hp Flathead "Funpower" Carb I'm asking $20 OBO ARC 4.500" Long...