speedway

Rupp Frame with Speedway Front End, 14" wheels and stretched swing arm

Rupp Frame with Speedway Front End, 14" wheels and stretched swing arm

Rupp Frame with Speedway Front End, 14" wheels and stretched swing arm

Rupp Frame with Speedway Front End, 14" wheels and stretched swing arm

Rupp Frame with Speedway Front End, 14" wheels and stretched swing arm

Among all of my other vehicular project chaos I acquired a 1970 Speedway Scarab frame only. That said doing research on the bike led me here. So now I have a few questions before I start snagging parts that won't work. What forks are compatible with these frames? What's available aftermarket for...

Hello everyone, I'm a new member and I haven't completely got this site figured out yet so I wasn't able to post any pics. The reason I joined is because I recently purchased a 1972 Speedway Super Spyder in great original condition with a DMV title. This bike does have a headlight, taillight...

I have a rear wheel set up with the off road tire id like to swap out and I'm rebuilding the carb on its hs40. wait till you all see the clutch set up. iv never seen anything like it. I was told its original

I figured id post some pictures for anybody who might enjoy this bike. I still need to rivet the snaps back on for the seat. Also, I have another rear wheel assembly with the offroad tire id like to put on. I am in the process of rebuilding the carb on its hs40

Looking for a nice set of 70 or 71 speedway forks with the headlight mounts. Pm or email Aaronfriedl@yahoo.com Thanks.

need help figuring out what year and make speedway this is. note foot operated brake as well as hand lever. mismatched front and rear rim, what kind of gas tank goes on this. any help would be appreciated.

I picked this bike up from a friend. I have two actually. however this has a hand lever to operate the brake in the rear. the other one I have has a foot brake. but it has a bracket near the rear tire that looks to be used to hold the brake cable for a hand lever brake. I have posted pics of the...

I started another thread about possibly parting out a Speedway Scorpion to see if there was interest. There is so I'll list the parts with prices and post the pictures. The pictures should expand when you pick it so you can zoom in for a closer look. To my knowledge this is a 1970 or 1971...

Does anyone have good pictures or drawings of the way the Speedway mini bikes torque converter was set up? I'm going to use a Comet 20 series, and I've heard I needs the 6" driven, so I'm assuming the whole thing is the 20 series for the engine shaft, a jackshaft (3/4 I'm assuming), two...

Is there a piece that goes on the Tecumseh HS40 engine that allows you you connect the torque converter guard to the engine end? If so, can anyone describe it? I see how it attaches on the lower end to the engine mounting plate but not sure of how it hooks to the engine. Thanks

Here is the true story. I went to look at a Speedway Minibike roller yesterday that a guy said he would sell me. I know the guy, he had it for a while and knew I was interested in it. He said it was a 70-71. At first site it looked great and I was going to buy it then I noticed someone had cut...