testing

Hello everyone. We all know how to calculate top speed of our minis (if not, there are calculators online to help). As fun as that is, it isn't really useful unless you're on the salt flats... I am working on a project that (will hopefully) be able to calculate acceleration and top...

Wanted to say hello & show the new bike, but I'm not having much luck with this forum. Trying again & will post pictures if I ever get an administrator to review the post & actually allow it to go to upload.

Found this maintenance advisory in my Clinton Master Parts manual for testing lighting coils. I'm sure its applicable to Tecumseh's. By the way, what ever happened to all the Clinton Lighting Coils? Like baby pigeons, you just dont see em. Why?

Has anybody tried to develop a CDI for honda /clone engine . I think i may have one figured out but still in R&D stage. Will give more info when i get all my parts in and do some testing. But it should be possible and i think i have finally figured it out. Gonna try at least. Any input ? All...

I was timing a tecumseh the other day when it occurred to me the sound level on my multimeter was very low. Much more faint than the last engine I timed. At first I thought it was the noise level around me but no this was distinctly fainter. When all was put back together I did not have...

I found this Tachometer while doing some searching yesterday. -Should work with 1 -10 cylinder gas engines -7 different background colors -Tinted - Unreadable when turned off I also found this 16,000 rpm Tachometer for cheap on ebay. I already have one that reads 13,000 rpm...

Can anyone please explain how to test the magneto components on the MM5A Indian engine ?? :shrug: We have NO spark ?? I see the points & condensor, coil and ignition in there as well.. We have NO spark.. Is there a way to test ea. of these pieces to see which one has gone bad ?? :confused...

Maybe im writing in invisible web ink HELLO??

Here are two reports I enjoyed reading while gaining a generous amount of knowledge on the subject. If you don't like to read, you should skip to the "Conclusion" section for a quick summary. 1. This one was conducted using a Briggs powered lawnmower...

This is stupid. Crazy Motorcycle Texting In India!! Funny!!! - YouTube

We loaded up our 2 shop karts and headed down to the track on Saturday for some racing and also to do some testing on a few new valve train products we are developing right now. Here's a few nice video clips we just uploaded to our YouTube channel from the second session of the day. Also the...

Sunday 6PM at the yac track.

Story as concisely as possible: Donated motor for the low-buck kart project. Tank was rotted. Replaced tank, cleaned & rebuilt carb., set to spec. adjustment. Ran OK @ idle, broke up under acceleration. Reset points and coil air gap. Good, smooth throttle response now but keeps shearing the...

Some new videos of my clone motor. I was surprised, it had me thinking it was going to completely let go. In the video I mentioned it was close to a 300 meter run but after measuring it’s right about ¼ mile. Thanks for checking out the vids, cheers from the rockies..

Haven't got it all figured out yet, but I'm getting there. If you listen good you can here me breathing real hard. Those idiot owers was arguing for a couple hours and was gonna call the race off. So I was just waiting all day long. Then they fired up the minibikes and left to the starting...