toad

I am looking for at least 1 but would like 2 Good Ruttman Toads Good originals would be great, Rollers are fine. Please Clean frames, After 15 big tire Bikes I want to build the Bikes my Brother and I started on back in 71.. If you have one message me and send some pictures..

Hi, been awhile since I have been on. I built a nice "DUCK" minibike last year. Maybe someone can steer me in the right direction. I have found an old Hodaka 1975 ROAD TOAD 100cc. Roller, no engine. I don't know if this is too big here? Being not a minibike. But I know lots of Guys have...

Mocked up my new Tecumseh AH58 2 cycle engine into a Ruttman Toad.Am going to try this 10-420-5 inch tire in the rear but it may be too wide with the spocket--will see. Question with a 2 cycle what gear should I run--12/60 of higher on the bottom as this engine revs a lot higher than a 4 cycle...

Got this awhile back off of peekster. Never did anything with it so time for someone else to enjoy. This roller is absolutely perfect. New seat. Correct bolts. Perfect double Indian tires. Ruttman clutch cover included but not clutch brake pictured. Asking $375. I am willing to ship if needed...

Here is an update of my Ruttman. Before it had a 79cc Predator which ran great, but simply didn't have a whole lot of torque. It now has a more period authentic 5 hp Briggs flattie with a 22mm Mikuni clone carb. It also has 5" TriStars for a little bit more ground clearance. She goes up ANY hill...

Hello all, I am new here and I recently picked up a few mini bikes from bartering here in Michigan (I have a problem with wheeling and dealing). I was hoping to get a little more info on them. The first one I will refer to as Lil Indian #1. It was listed as a 1969. So far from looking online...

Started an new project today--my chrome Toad. Took the old engine off and began to clean up the chrome frame. A few nicks a scrapes but was amazed at how good it was. Cleaned up and added a set of fenders.An order from OldMiniBikes for tires, tubes, bearings and chain guard along with a Harbor Freight...

Picked up another bike today from close to the Detroit border. The pics I saw before I purchased it did not prepare me for the reality. The bike is a Ruttman Toad and the entire frame is chrome. My question is did this ever come out of the factory like this or was it added. I got her home a...

Hats off to the Boatguy for selling me a Ruppman Toad, my kids are having a blast with it. Pictures of our epic minibike journey to follow when summer ends.:thumbsup:

i have had this bike since the summer, i was just to busy to finish it. finally this week i put time into building this bike and it turned out good. I wrapped the frame in 3M carbon Fiber, and painted the front forks black, theirs a 6.5 hp clone on their, i have more pictures i have to post of it.

I'm listing this Toad for a friend who doesn't have a computer at this time. It has a period correct 4 hp Tecumseh from a Ruttman Wild Goose with a newer style pull start and engine cover. The frame is powder coated. If anyone has questions I can relay the owners cell number. He is asking...

As shown. Needs work. $75. Will ship from 49279.

Decided I needed more power than my 3HP toad so I changed it out for a new Predator Hemi 212.Most hooked up after this pic--just need to fab clutch brake. This motor fits the small frames beautifully. The new gas tank has the filler in the middle which fits between the rails perfectly. Can't...

This is a mint 71 Ruttman Horny Toad that was upgraded to 6" mags. Powder coated Gucky Orange. All new parts. Newer Tecumseh 5.5 H.P. Crate engine. All new axles and high speed bearings. New Azusa 5 Spoke 6" Inch Mags instead of the 4 inch steel wheels. New 6" Universal Cheng Shin tires from a...

2 Hodaka's - Trade for basket case Yamaha onne is missing the cylinder though

I got bored yesterday after doing all my Honey-Do's.....So I put my trusty 99cc Predator on the Toad. I made a racy air cleaner and installed an open header. Looks like I'll need some sort of heat shield for the seat......But it flies.

First attempt at a Ruttman, I had a similar blue one back in the late 60's, built this for my grandson...basically a stock Toad, repainted in it's original Plum Crazy, added fenders, not exactly correct with the 4" wheels but close enough.....got help from members for parts to complete.....thanks!

This is the finished Toad...it has a 79cc Greyhound with a modified air cleaner and open header.That's an OMBW clutch guard with a new Ruttman decal-it looks almost like the original.... It also features a steel 4" wheel with a 60t in the rear,and an Azusalite front-both have Carlisle 4.10/3.50x...

Nice little Ruttman Toad :thumbsup: I wonder if it's a OldMiniBikes member?

Here is the Toad I have been working on. It has a 79cc Greyhound clone with an open exhaust and a modified air filter. I painted the sheetmetal red and put on a tank from my 99cc Predator-direct fit!! The rear wheel is a two piece steel with a 60t sprocket,and the front is an Azusalite. Both...