Ok, so I have this nice headlight that I ultimately want to put on my terra torque. It is a nice chrome shell with a push button and toggle switch on the back. Additionally, there is a red wire and blue wire coming out of the shell for wiring up the headlight. I have a lighted H50 with three wires, green, red, and black. I know that the green is my kill switch wire and I already have that hooked up. The on the engine my red is my positive and the black is the negative (ground). So I figure I need to hook up the red from the engine to the red from the headlight, but what do I do with the black on the engine and the blue on the headlight? I opened up the headlight and noted that there is a yellow wire grounding the bulb to the shell. I also noted a number of black wires hooked to the switches and mostly to the blue wire, with I think one going to the red. Anyone have any ideas of what I do witht he black engine wire and blue headlight wire? I want to make sure I have it all hooked up correctly as I do not want to burn anything out. I took some pictures which are attached. Any assistance would be much appreciated.
Last edited: