About a week and a half ago I picked up these 2 rollers. One is a bird and the other is an Arco. I stripped both of them to bare metal and fabricated a scrub brake for both.The Birds forks were just slightly bent in, so I heated them up and straightened them , and while I was at it I heated the handlebars and pushed them out about an inch or so . I didn't want them to be knee bangers.
I went with Purple on the bird. It has a 3hp Briggs.
Before
after
The Arco is painted Candy Blue. I picked up a 3.5hp Tecumseh for it. Here is some pics of its progress
before
I went with Purple on the bird. It has a 3hp Briggs.
Before
after
The Arco is painted Candy Blue. I picked up a 3.5hp Tecumseh for it. Here is some pics of its progress
before