Briggs Model 19

buckeye

Well-Known Member
#3
I think I have one.
You have any numbers? I will look and see. Mine may be a "N".


If this helps let me know.:thumbsup:
 
#6
Briggs 19 Type 706051 SN 669156

Need piston rings, headgasket, and valves/guides.
ok from the book 27752 head gasket Head Gasket, 7-02416, 14-1152, Replaces: Briggs & Stratton 27752; For models 19, 19D, 200400 on sale from Tulsa Engine Warehouse

rings standard set 3/32 thick 292100 292100 BRIGGS AND STRATTON PISTON RING SET STANDARD OEM

set .010 o.s " """""""" 292101 Pig Iron Parts Vintage Outdoor Power Equipment Parts Liquidators

set .020 o.s ^^^^^ 292102
set .030 o.s ^^^^^^^ 292103

havent found a listing yet for them but there is the numbers .ok idid find some listing for them but :scared: its all over the board as to where they come from .



valve exhaust 23835 Briggs & Stratton 23835 VALVE-EXHAUST UPC Code: 024847763102
valve intake 23836 Briggs & Stratton 23836 VALVE-INTAKE UPC Code: 024847763119


no listed numbers for briggs guides in this book :shrug:
may just have to look at the stem size and order bushings for them . as i cant find any thing listed for that exact motor . but briggs does use alot of the same size parts in other motors just different numbers . just have to match up the size .

if ya need any other numbers let me know and ill see what i can find in the book :thumbsup:
 
#8
no problem but all i did was look in the book :laugh: thank it ..... the big book knows alll :bowdown::bowdown::eek:ut:. ya know that is the 3rd time i have looked in the heavy thing for some one on here to get parts numbers for some old dead toy . glad i was able to get it from a member on here they were going to toss it if no one wanted it . with my rotter memory i cant remember who i got it from now :doah: but thanks again for the cool book :thumbsup:
 
#9
ok from the book 27752 head gasket Head Gasket, 7-02416, 14-1152, Replaces: Briggs & Stratton 27752; For models 19, 19D, 200400 on sale from Tulsa Engine Warehouse

rings standard set 3/32 thick 292100 292100 BRIGGS AND STRATTON PISTON RING SET STANDARD OEM

set .010 o.s " """""""" 292101 Pig Iron Parts Vintage Outdoor Power Equipment Parts Liquidators

set .020 o.s ^^^^^ 292102
set .030 o.s ^^^^^^^ 292103

havent found a listing yet for them but there is the numbers .ok idid find some listing for them but :scared: its all over the board as to where they come from .



valve exhaust 23835 Briggs & Stratton 23835 VALVE-EXHAUST UPC Code: 024847763102
valve intake 23836 Briggs & Stratton 23836 VALVE-INTAKE UPC Code: 024847763119




no listed numbers for briggs guides in this book :shrug:
may just have to look at the stem size and order bushings for them . as i cant find any thing listed for that exact motor . but briggs does use alot of the same size parts in other motors just different numbers . just have to match up the size .

if ya need any other numbers let me know and ill see what i can find in the book :thumbsup:
Ok now is another question...

Any leads on a new piston in case I need one? Standard, .010, .020,?
 
#10
Last edited:
#11
Ok so here is the next question.

Measureing the bore, its 4 thousands over. Can I get away with a standard bore piston and rings or should I have it bored out? I just dont want oil to slip past piston like it does now..

Also thanks for your time spent.
 
Last edited:
Top